Cart

Your Cart is Empty

Back To Shop

Category: ADG BRASS

ADG brass

ADG BRASS

J&A Outdoors Firearm Solutions offers ADG BRASS Reloading components. ADG brass is designed not only for outstanding consistency, but also for enhanced durability. We accomplished this by adding material to the case in specific areas to strengthen it.  With the additional material, our brass is heavier than most other manufacturers brass and therefore will require lower charge weights to achieve the same pressures and velocities due to the reduced volume inside the brass.

We recommend using a reputable load data source and working up from their recommended minimum starting loads.  Failure to reduce charge weights established using other manufacturers brass will likely result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels. It is imperative that you START LOW and work up to safe pressures. Failure to do so may result in a overpressure situation.

All ADG brass reloading components are sold in their standard finish showing annealing marks.

***ADG Brass is sold with 1 ammo box & 50 pieces of brass per box***

We currently offer brass in these calibers:

6.5 CREEDMOOR, 6.5 PRC, 6.5 SAUM, 6.5 SAUM, 7 SAUM, 7 REM MAG, 28 NOSLER, 308 WINCHESTER, 300 WIN MAG, 300 NORMA MAG, 300 PRC, 300 RUM, 30 NOSLER, 338 LAPUA, 338 RUM, 338 EDGE, 7 PRC.

Rest assured – if you try this brass, you will not be disappointed! We have had great reviews from shooters around the nation using this brass. It delivers the consistency needed for long range shooting along with the robust features most people need for those accurate hunting/tactical loads!

Showing all 22 results

  • 6.5 SAUM

    $107.50
    Due to high demand, we are limiting 1 box per customer – per day.
    Read more
  • 300 PRC

    $88.07

    50 count box

    Standard Annealed Finish

     

    ADG 300 PRC

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Add to cart
  • 7 PRC

    $97.85
    Due to extreme demand and low supply, we are limiting 1 box per customer per order.

     

    Cartridge: 7mm PRC

    Primer Pocket: Large

    Annealed: Yes

    Primed: No

    Box Count: 50

    Read more
  • 6.5 PRC

    $84.00

    50 count box

    Standard Annealed Finish

     

    6.5 PRC (Precision Rifle Cartridge) 

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Add to cart
  • 7mm SAUM

    $99.50

    50 count box

    Standard Annealed Finish

     

    ADG 7 SAUM brass

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Add to cart
  • 300 WSM

    $103.00
    Due to high demand we are limiting one box per customer, per day.
    Add to cart
  • 7mm Rem Ultra Mag (RUM)

    $121.50

    7 RUM brass (Remington Ultra Magnum)

    50 Count Box

    Standard Anneal line visible.

    Add to cart
  • 28 Nosler

    $137.50

    50 count box

    Standard Annealed Finish

     

     

    ADG 28 Nosler

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Add to cart
  • 375 Rem Ultra Mag

    $132.50

    Description

    375 Rem Ultra Mag Brass – ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

    Available in our standard finish with the anneal line visible

    Read more
  • 30 Nosler

    $135.00

    50 count box

    Standard Annealed Finish

     

     

    ADG 30 Nosler

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Read more
  • 300 Norma Mag

    $127.50

    50 count box

    Standard Annealed Finish

     

     

    ADG 300 Norma Magnum

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Read more
  • 300 RUM

    $118.80$126.00

    50 count box

    300 Rem Ultra  Mag

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Select options
  • 300 Win Mag

    $87.50
    50 count box

    Standard Annealed Finish

     

     

    Add to cart
  • 308 winchester

    $41.50

    50 count box

    Standard Annealed Finish

     

     

    ADG 308 winchester

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Read more
  • 338 EDGE

    $132.50$139.13

    338 EDGE Additional information CALIBER 338 EDGE FINISH Standard / BRIGHT QUANTITY Retail Box (50 pc) CASE WEIGHT 264.7 grains (average) CASE VOLUME 114.6 grains/H2O (average) NECK WALL THICKNESS .0146″ (average) Our brass is tracked with a custom lot number for quality control which is located on the underside of box. Premium Rifle Cartridge Cases …

    338 EDGERead More

    Select options
  • 338 Lapua

    $145.00

    50 count box

    Standard Annealed Finish

     

     

    ADG 338 Lapua

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Read more
  • 338 RUM

    $132.50$139.13

    338 RUM Additional information CALIBER 338 RUM FINISH Standard/Bright & Shiny QUANTITY Retail Box (50 pc) CASE WEIGHT 258.5 grains (average) CASE VOLUME 110.5 grains/H2O (average) NECK WALL THICKNESS .0146″ (average) Our brass is tracked with a custom lot number for quality control which is located on the underside of box. Premium Rifle Cartridge Cases …

    338 RUMRead More

    Select options
  • 6.5 creedmoor

    $45.50

    50 count box

    Standard Annealed Finish

     

     

    ADG 6.5 creedmoor

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Read more
  • 7mm Remington Magnum

    $93.00$97.65

     

    50 count box

    Standard Annealed or bright shiny finish

     

    7mm REM MAG BRASS

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Select options

Cart

Your Cart is Empty

Back To Shop