Top rated products
-
X-caliber 22 caliber blank 1-8 twist 27'' sendero contour
$245.00
-
30 Nosler
$122.57
-
Tikka FLUTED bolt assembly
$469.00
-
Remington 700 & Christensen Bolts
$250.00 – $479.99
-
Hornady 22cal 55gr SP W/Cannelure #2266
$17.99
6.5 creedmoor
$45.50
50 count box
Standard Annealed Finish
ADG 6.5 creedmoor
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
Out of stock
Additional information
| CALIBER | 6.5mm creedmoor |
|---|---|
| FINISH | Standard |
| QUANITY | Retail Box (50 pc) |
| CASE WEIGHT | 169.5 grains (average) |
| CASE VOLUME | 49.6 grains/H2O (average) |
| NECK WALL THICKNESS | .0136″ (average) |
Our brass is tracked with a custom lot number for quality control which is located on the underside of box. Premium Rifle Cartridge Cases –
All ADG Brass is offered in a 50 piece retail box that utilizes a custom ammo box and foam liner to protect the brass during shipment. These box are made in the USA and can be reused to store and transport your loaded ammo.
| Weight | 160 oz |
|---|---|
| Dimensions | 8 × 6 × 4 in |
Related products
-
338 EDGE
$121.03 – $127.08Select options338 EDGE Additional information CALIBER 338 EDGE FINISH Standard / BRIGHT QUANTITY Retail Box (50 pc) CASE WEIGHT 264.7 grains (average) CASE VOLUME 114.6 grains/H2O (average) NECK WALL THICKNESS .0146″ (average) Our brass is tracked with a custom lot number for quality control which is located on the underside of box. Premium Rifle Cartridge Cases …
-
30 Nosler
$122.57Read more50 count box
Standard Annealed Finish
ADG 30 Nosler
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
338 RUM
$121.03 – $127.08Select optionsAdditional information CALIBER 338 RUM FINISH Standard/Bright & Shiny QUANTITY Retail Box (50 pc) CASE WEIGHT 258.5 grains (average) CASE VOLUME 110.5 grains/H2O (average) NECK WALL THICKNESS .0146″ (average) Our brass is tracked with a custom lot number for quality control which is located on the underside of box. Premium Rifle Cartridge Cases – …
