Category
- ADG BRASS Reloading components
- AG Composites
- Atlas bipods & accessories
- Berger Bullets
- Christensen Arms Actions & Accessories
- Custom barrel Blanks
- Custom Rifles
- Defiance Actions
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Mesa Precision Arms
- Muzzle Brakes
- Norma Brass
- Proof Research
- Redding dies
- Remington Actions & Accessories
- Savage actions & accessories
- SRS Rails
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- TriggerTech Triggers
- Vortex Optics
- XLR Industries
Products
- ADG BRASS Reloading components
- AG Composites
- Atlas bipods & accessories
- Berger Bullets
- Christensen Arms Actions & Accessories
- Custom barrel Blanks
- Custom Rifles
- Defiance Actions
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Mesa Precision Arms
- Muzzle Brakes
- Norma Brass
- Proof Research
- Redding dies
- Remington Actions & Accessories
- Savage actions & accessories
- SRS Rails
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- TriggerTech Triggers
- Vortex Optics
- XLR Industries
Top rated products
-
T3x WSM short action $775.00
-
Hawkins 30mm Low Scope Rings
$185.00$167.00 -
SRS 4.25 Bipod Rail
$45.00$37.99 -
6.5 Creedmoor $70.00
-
Savage Large Shank Nut & Lug
$35.00$29.99
Little bastard SS 30 cal 5/8-24
$195.00 $165.00
30 caliber
5/8-24 muzzle threads
stainless steel
- 1″ in Diameter,
- 2.55″ In Length
- Weighs 4.4 oz
- Made for a barrel diameters of .750 to 1 inch.
The Gen 3 Little Bastard can handle magnum cartridges.
This brake includes set screws, one Allen wrench, and a single-use Threadtite.
Description:
American Precision Arms is very excited to share the release of the Generation 3 Little Bastard. It has been a long time coming but we wanted to make sure everything was perfect before offering something new.
The development of APA Gen 3 Little Bastard was the result of American Precision Arms’ constant pursuit of breaking the mold and a desire to meet the demands of the Long-Range and Hunting markets. APA has combined the standards of high-level performance and reliability with distinctive design enhancements to improve both accuracy and performance. These enhancements benefit the shooter experience at the range and in the field where every advantage matters.
The roots of the new Generation 3 version of the Little Bastard lie in the requests of the elite long-range precision rifle community. APA’s goal was to meet the needs of those shooters while also maintaining their standards of pristine manufacturing. Among the design, changes are three key features. The advanced Unique Recoil Profile tunable top port design allows the shooter to fine-tune the muzzle movement for absolute target retention. In addition to that, the new lock nut design creates a zero over rotating platform. Last is the addition of a fourth Bastard port section that eliminates even more recoil than before.
NOT JUST STOPING RECOIL, BUT LATERAL MOVEMENT AND MUZZLE RISE AS WELL, FOR A TRULY NEUTRAL SIGHT PICTURE.
URP (Unique Recoil Profile) Top Ports
We developed the U.R.P. Adjustable Gas System. These aren’t just randomly placed top ports. Every port is placed adjacent to the internal Bastard tooth where there is maximum pressure build-up. This makes the adjustable ports directionally effective.
The unique tunable gas system combined with the trademark APA ports work together to achieve a sight picture that moves less than ever before. There are 8 directional gas ports that can be tuned to counteract you’re U.R.P. (unique recoil profile).
There are 256 combinations to keep your sights on target. To calibrate the brake to your U.R.P., start testing with all the gas screws installed. Pay attention to the movement of your reticle, and begin removing the gas screws as the recoil requires.
When the gas screws are removed on the right side, the rifle will be shifted left. For the opposite effect simply remove the screws on the left. The gas holes closer to the nut have a more dramatic effect and the ports closer to the brake crown have a lesser effect. When you find your U.R.P. combination, Threadtite your screws into place.
Out of stock
Little bastard SS 30 cal 5/8-24
30 caliber
5/8-24 muzzle threads
stainless steel
- 1″ in Diameter,
- 2.55″ In Length
- Weighs 4.4 oz
- Made for a barrel diameters of .750 to 1 inch.
The Gen 3 Little Bastard can handle magnum cartridges.
This brake includes set screws, one Allen wrench, and a single-use Threadtite.
Description:
American Precision Arms is very excited to share the release of the Generation 3 Little Bastard. It has been a long time coming but we wanted to make sure everything was perfect before offering something new.
The development of APA Gen 3 Little Bastard was the result of American Precision Arms’ constant pursuit of breaking the mold and a desire to meet the demands of the Long-Range and Hunting markets. APA has combined the standards of high-level performance and reliability with distinctive design enhancements to improve both accuracy and performance. These enhancements benefit the shooter experience at the range and in the field where every advantage matters.
The roots of the new Generation 3 version of the Little Bastard lie in the requests of the elite long-range precision rifle community. APA’s goal was to meet the needs of those shooters while also maintaining their standards of pristine manufacturing. Among the design, changes are three key features. The advanced Unique Recoil Profile tunable top port design allows the shooter to fine-tune the muzzle movement for absolute target retention. In addition to that, the new lock nut design creates a zero over rotating platform. Last is the addition of a fourth Bastard port section that eliminates even more recoil than before.
NOT JUST STOPING RECOIL, BUT LATERAL MOVEMENT AND MUZZLE RISE AS WELL, FOR A TRULY NEUTRAL SIGHT PICTURE.
URP (Unique Recoil Profile) Top Ports
We developed the U.R.P. Adjustable Gas System. These aren’t just randomly placed top ports. Every port is placed adjacent to the internal Bastard tooth where there is maximum pressure build-up. This makes the adjustable ports directionally effective.
The unique tunable gas system combined with the trademark APA ports work together to achieve a sight picture that moves less than ever before. There are 8 directional gas ports that can be tuned to counteract you’re U.R.P. (unique recoil profile).
There are 256 combinations to keep your sights on target. To calibrate the brake to your U.R.P., start testing with all the gas screws installed. Pay attention to the movement of your reticle, and begin removing the gas screws as the recoil requires.
When the gas screws are removed on the right side, the rifle will be shifted left. For the opposite effect simply remove the screws on the left. The gas holes closer to the nut have a more dramatic effect and the ports closer to the brake crown have a lesser effect. When you find your U.R.P. combination, Threadtite your screws into place.
Return Policy:
Buyer has 14 days from date of delivery to return item. All Returns are subject to a 20% restocking fee no exceptions, item must be in new unused/unopen condition in original packaging. buyer must pay for return shipping.
Weight | 32 oz |
---|---|
Dimensions | 7 × 6 × 4 in |
Related products
-
Little bastard 30 cal 1/2-28
$190.00$179.99Read more30 caliber
1/2-28 muzzle threads
- 1″ in Diameter,
- 2.55″ In Length
- Weighs 4.4 oz
- Made for a barrel diameters of .750 to 1 inch.
The Gen 3 Little Bastard can handle magnum cartridges.
This brake includes set screws, one Allen wrench, and a single-use Threadtite.
Description:
American Precision Arms is very excited to share the release of the Generation 3 Little Bastard. It has been a long time coming but we wanted to make sure everything was perfect before offering something new.
The development of APA Gen 3 Little Bastard was the result of American Precision Arms’ constant pursuit of breaking the mold and a desire to meet the demands of the Long-Range and Hunting markets. APA has combined the standards of high-level performance and reliability with distinctive design enhancements to improve both accuracy and performance. These enhancements benefit the shooter experience at the range and in the field where every advantage matters.
The roots of the new Generation 3 version of the Little Bastard lie in the requests of the elite long-range precision rifle community. APA’s goal was to meet the needs of those shooters while also maintaining their standards of pristine manufacturing. Among the design, changes are three key features. The advanced Unique Recoil Profile tunable top port design allows the shooter to fine-tune the muzzle movement for absolute target retention. In addition to that, the new lock nut design creates a zero over rotating platform. Last is the addition of a fourth Bastard port section that eliminates even more recoil than before.
NOT JUST STOPING RECOIL, BUT LATERAL MOVEMENT AND MUZZLE RISE AS WELL, FOR A TRULY NEUTRAL SIGHT PICTURE.
URP (Unique Recoil Profile) Top Ports
This allows the shooter to not only combat direct recoil but muzzle rise and lateral movement based on the characteristics of their rifle, personal grip, stance and the position they are shooting from.We developed the U.R.P. Adjustable Gas System. These aren’t just randomly placed top ports. Every port is placed adjacent to the internal Bastard tooth where there is maximum pressure build-up. This makes the adjustable ports directionally effective.
The unique tunable gas system combined with the trademark APA ports work together to achieve a sight picture that moves less than ever before. There are 8 directional gas ports that can be tuned to counteract you’re U.R.P. (unique recoil profile).
There are 256 combinations to keep your sights on target. To calibrate the brake to your U.R.P., start testing with all the gas screws installed. Pay attention to the movement of your reticle, and begin removing the gas screws as the recoil requires.
When the gas screws are removed on the right side, the rifle will be shifted left. For the opposite effect simply remove the screws on the left. The gas holes closer to the nut have a more dramatic effect and the ports closer to the brake crown have a lesser effect. When you find your U.R.P. combination, Threadtite your screws into place.
Additional Row of Bastard Ports• For Added Recoil ReductionNew Lock-Nut Design• Perfect Muzzle Placement• No Carbon Ring• No Over Rotation• Stronger Lock Up -
T3X short action 308
$625.00Add to cartTikka T3x lite short action
- .473 bolt face (works for calibers like 22-250,243,6.5 creedmoor,7mm-08, 308)
- Chromoly blued steel
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3x WSM short action
$775.00Read moreTikka T3x lite WSM short action
- .540 magnum bolt face (works for calibers like 270 wsm, 7 wsm, 300 wsm, 6.5 saum, 7 saum, 300 saum, 6.5 PRC)
- Chromoly blued steel
- Factory fluted bolt
- Factory oversized bolt knob
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3X S.S. short action 308
$675.00Read moreTikka T3x lite short action
- .473 bolt face (works for calibers like 22-250,243,6.5 creedmoor,7mm-08, 308)
- Stainless steel
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued & Uncoated Stainless-steel actions – these will come with no imperfections on the finish. Also, In some cases there will be tooling marks on the inside of the receiver face/threads where tikka/Sako reams the bolt raceways with their tooling. This is cosmetic only – it does not affect function whatsoever.