Top rated products
-
Triggertech Primary Trigger
$174.99
-
TriggerTech Diamond Flat Straight
$334.99
-
TriggerTech Diamond Curved
$334.99
-
BT46-LW17 PSR Atlas Bipod
$354.95
-
BT47-LW17 PSR Atlas Bipod
$374.95
4.5” UL Bipod Picatinny Mount
Price range: $6.99 through $42.00
MADE IN THE USA!
- 4.5” Bipod Picatinny Mount.
- Constructed from Billet Aluminum.
- .9 ounce weight
- Sling swivel stud.
- This 4.5” picatinny bipod Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5″ with a Semi Rounded Bottom to accommodate many chassis/surfaces.
4.5” UL Bipod Picatinny Mount
4.5” UL Bipod Picatinny Mount
Constructed from Billet Aluminum.
Ultralight .9 ounce overall weight
Sling swivel stud machined into the rail.
This 4.5” picatinny bipod Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5″ with a Semi Rounded Bottom to accommodate many chassis/surfaces.
MADE IN THE USA!
Fasteners are included (2 10-32 fasteners and 2 Tee nuts.) Or choose to run it with your sling studs.
Works EXCELLENT with the Atlas Bipods!
J&A Outdoors – Firearm Solutions – Shooting Products (jaoutdoors.com)
Atlas Bipods – Official Manufacturer – B&T Industries (accu-shot.com)
| Configuration: | Tungsten Grey Rail Only, FDE Rail Only, OD Green Rail Only, Bronze Rail Only, Black Rail Only, Rail W/ Fasteners Black, Rail W/ Fasteners OD Green, Rail W/ Fasteners FDE, Rail W/ Fasteners Tungsten Grey, Rail W/ Fasteners Bronze, Fastener Kit |
|---|
Related products
-
Atlas BT81 LIL’ BRANDI
$49.99Add to cartAtlas BT81 LIL’ BRANDI The BT81 Lil’ Brandi is our long-awaited answer to getting a 1913 Picatinny Rail mounted on a traditional rifle stock without taking the rifle apart, drilling holes or damaging the stock. Installation utilizes the existing sling stud and provided cross pin, set screw and hex wrench. It features 3 usable slots …
-
BT74: Atlas Raider Cleat Feet
$64.00Read moreBT74: Atlas Raider Cleat Feet
The BT74 Atlas Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit V8, PSR and CAL model Atlas Bipods, as well as adaptors that use our feet. Easily installed with the press of a stainless steel plunger.
The Cleat portion is approximately 0.75” long with the largest outer diameter of approximately 1.155”. Sold as a pair. Available in raw stainless steel only.
Total Weight of Pair: 2.65 ounces
Product will work on V8, PSR and CAL models only.
-
BT47-LW17 PSR Atlas Bipod
$374.95Add to cartBT47-LW17 PSR Atlas Bipod: Tall with ADM 170-S Lever
The BT47-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.
It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.
The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
- Height Range: 6.4 – 12.8″ (8.5” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5″ diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 15.13 ounces approx.
- Footprint: 10-14.5″
-
BT32: Atlas Rubber Feet
$19.95Read moreBT32: Atlas Standard Rubber Feet
The BT32 Atlas Standard Rubber Feet are standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only.
Weight: 1.0 ounce
These fit atlas V8, PSR & CAL bipods.
