Top rated products
-
Triggertech Primary Trigger
$164.99
-
TriggerTech Diamond Flat Straight
$304.99
-
TriggerTech Diamond Curved
$304.99
-
BT46-LW17 PSR Atlas Bipod
$354.95
-
BT47-LW17 PSR Atlas Bipod
$374.95
Category: Remington Accessories
Remington accessories.
Showing 1–32 of 52 results
-
Sale!
Christensen Mesa Barrel
$199.99 – $275.00Select optionsCompatible with the Remington 700 Actions.
- ***Important to note, these barrels have been fired from the factory to ensure safety standards were met – this is UNAVOIDABLE***
- Due to the design of the Christensen Action, headspace will need to be checked/addressed by a competent gunsmith. Caliber – engravings are not guaranteed to line up with stock lines due to variance in receivers.
- Barrel tenon specs: 1.0625″ x 16 Tpi
- GUNSMITH INSTALLATION STRONGLY ENCOURAGED.
- Barrels are removed with modern/proper equipment – with that being said, handling marks may be present from disassembly.
-
XLR ELEMENT 4.0 MAGNESIUM CHASSIS PRE-ORDER
$1,403.00 – $1,463.00Select optionsXLR 4.0 Pre-order
(REMINGTON chassis due date ***Expected LATE June 2024***)
- XLR Element 4.0 Magnesium Chassis
- Element 4.0 Magnesium Chassis
- Carbon Fiber Ultralight Pistol Grip
- Ultralight Carbon Fiber Butt Stock (12.5 LOP)
- XLR Folding buttstock adapter.
- XLR adjustable Thumb Rest
- Carbon Buttstock Bag Rider
-
MANNERS LRH SHORT ACTION
$1,055.00 – $1,245.00Select optionsMANNERS LRH SHORT ACTION The new MANNERS LRH SHORT ACTION stock was developed for the modern long range hunting enthusiast looking for the ultimate light weight adjustable hunting stock. This is the perfect platform to start that dream precision hunting build or for competitors to build that lightweight competition gun for the new long range …
-
Manners EH1 Defiance
$850.00Read moreManners Eh1 M5 long action rifle stock
- swamp camo finish
- RIGHT hand
- Inlet for defiance long actions (remington 700 long actions & clones will fit, the ejection ports cutout may be slightly off, however footprint is the same)
- Barrel channel is inlet for Proof Sendero Contour
- Bottom metal inlet for M5 long action
3 flush cups installed, (1 Bottom Rear, 1 Left Front, 1 Left Rear)
Bipod Rail Included with mounting hardware.
Due to so many variances in rifles/barreled actions Some minor fitting may be required to fit this to your barreled action.
-
Sale!
WPR Rifle Stock
Original price was: $725.00.$679.99Current price is: $679.99.Select options- Action Inlet – Defiance (700 Clone)
- Proof Sendero Carbon Contour
- Average weight 27 Ounces
(Will work with other Remington 700 Long Action Clone Receivers – some inletting may be required for other 700 LA clones)
-
Sale!
Altitude Stock Custom Order
Original price was: $725.00.$675.00Current price is: $675.00.Select optionsAltitude Stock Custom Order NOTE: These stocks are MADE TO ORDER. Current lead time is 8-10 weeks. Build your Altitude Stock exactly to your specs! The Altitude series stock is designed for the hunter or shooter that wants to save weight on their rifle without sacrificing strength, durability and still have …
-
Sale!
M5 Detachable Box Magazine
$158.99 – $159.99Select optionsM5 Detachable Box Magazine Pure Precision M5 style bottom metal that accepts all AICS type magazines. This bottom metal has a low-profile Ambidextrous Magazine release. J&A Outdoors – Firearm Solutions – Shooting Products (jaoutdoors.com)
-
700 BDL Bottom Metal Kit
$225.00Select options700 BDL Bottom Metal Kit Replacement 700 BDL Bottom Metal Kit that fits Remington 700 actions and CLONES. Bottom Metal itself is a Drop in fit for Mesa Altitude Stocks along with factory Remington 700 stocks. Rounded profile minimizes snagging/sharp edges. PLEASE NOTE- These kits are sourced from different manufacturers and components are subject to …
-
Sale!
Short Action 700 BDL Bottom Metal
Original price was: $159.99.$145.00Current price is: $145.00.Add to cartReplacement 700 BDL Bottom Metal that fits Remington 700 SHORT action and CLONES.
Bottom Metal itself is a Drop in fit for Mesa precision Altitude SHORT action stocks along with factory Remington 700 short action stocks.
Rounded profile minimizes snagging/sharp edges.
-
Sale!
Long Action 700 BDL Bottom Metal
Original price was: $159.99.$145.00Current price is: $145.00.Add to cartReplacement 700 BDL Bottom Metal that fits Remington 700 LONG action and CLONES.
Bottom Metal itself is a Drop in fit for Mesa Altitude Long Action Stocks along with factory Remington 700 stocks.
Rounded profile minimizes snagging/sharp edges.
-
Remington 700 Hawkins Featherweight Rings
$90.00Select optionsRemington 700 Hawkins Featherweight Rings Hawkins Precision Featherweight Scope Rings are a direct attach solution for your ultralight hunting rifle set-up. Machined out of a single piece of billet aluminum, these rings weigh in between 2-3 ounces and are rated for up to magnum caliber firearms. Featherweights are available in 1″ and 30mm diameters in …
-
Sale!
Hawkins 30mm Ultra Light Tactical Scope Rings
Original price was: $185.00.$167.00Current price is: $167.00.Select optionsHawkins 30mm Ultra Light Tactical Scope Rings Ultra-Light Tactical Scope Rings Hawkins 30mm Ultra Light Tactical Scope Rings are made in the USA out of billet 6061 T6 aluminum. These fully machined rings are robust and feature a corrosion-resistant black anodized finish. Machined with a clamp and recoil lug made from 7075 aluminum, these scope …
-
Sale!
Hawkins 34mm Ultra Light Tactical Scope Rings
Original price was: $185.00.$167.00Current price is: $167.00.Add to cartFitment:
Main Tube diameter: 34MM
Ring height: Medium 1.0” (see image for height measurements)
DESCRIPTION
Ultra-light tactical scope rings from Hawkins Precision are made in America out of a single billet of 6061 T6 aluminum. These fully machined rings feature a rigid, corrosion-resistant, black anodized finish. Machined with a clamp made from 7075 aluminum, these scope rings deliver extra strength and grip where it counts. And the ultra-light design frees you from carrying unnecessary bulk. Hawkins Precision scope rings come standard with an anti-cant level cap and are available in 30mm and 34mm, sized in low, medium, and high.
Size Measurement from Picatinny Rail
to optical center30mm Application Medium 1.0″ * 56mm objective or smaller with standard barrel contours Torque Specifications
Check the torque recommendations for your rifle scope before using these recommendations.
*Ring top screws: 25-in-lb.
*Base cross bolts: 65-in-lb. -
Sale!
4.5” Bipod Picatinny Mount
$6.99 – $42.00Select optionsMADE IN THE USA!
- 4.5” Bipod Picatinny Mount.
- Constructed from Billet Aluminum.
- 1 ounce weight
- QD Cup machined into the mount along with sling swivel stud.
- This 4.5” picatinny bipod Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5″ with a Semi Rounded Bottom to accommodate many chassis/surfaces.
-
Sale!
Mini 1.75” Arca Rail Mount
$28.99 – $39.99Select optionsMade in the USA by hard working Americans!
- 1.75” arca rail Rifle Mount.
- Billet aluminum construction.
- Anodized black.
- Flat bottom or semi rounded bottom available.
- Weight: .55 ounces.
- Compatible with Arca Swiss style tripod heads.
- Overall length: 1.75” OAL
- Bolt/Mount spacing up to 1.2 inches.
- 10-32 fasteners with tee nuts included for installation.
-
Sale!
3” Arca Rail Mount
Original price was: $45.00.$37.99Current price is: $37.99.Add to cartMade in the USA by hard working Americans!
- 3” arca rail Rifle Mount.
- Billet aluminum construction.
- Anodized black.
- Flat bottom with a small radius in the center to accommodate a multitude of stock designs.
- Weight: .85 ounces.
- Compatible with Arca Swiss style tripod heads.
- Overall length: 3.0” OAL
- Bolt/Mount spacing up to 1.2 inches.
- 10-32 fasteners with tee nuts included for installation.
-
Sale!
4” Arca Balance Rail Mount
$42.99 – $65.00Select optionsMade in the USA by hard working Americans!
- 4” arca balance rail mount.
- Available in anodized black, burnt bronze or tungsten cerakote.
- Perfect balance point for mounting just forward of front action screw.
- Billet aluminum construction.
- Semi rounded bottom (Center radius cut on the underside to aid in various stock designs.)
- Weight: 1.25 ounces.
- Compatible with Arca Swiss style tripod heads.
- Overall length: 4.0” OAL
- 10-32 fasteners with tee nuts included for installation.
-
Sale!
Remington bolt stop kit extended
Original price was: $60.00.$55.00Current price is: $55.00.Select optionsRemington 700 bolt stop extended length with bolt release spring and trigger pins.
This fits Remington 700’s.
This is an extended length bolt stop that allows your bolt to reach farther back for Wyatt extended magazines – OR – you can run this on a factory Remington 700 without issues as well!
Stainless trigger pins
OEM Remington bolt release return spring.
This fits short and long action Remington model 700’s.
-
Remington 700 X Mark Trigger
$29.99 – $34.99Select optionsRemington 700 X Mark Trigger Right hand Brand new take off units. No original packaging. These triggers are not a member of the recall – they are new production post recall – ready to go! These fit all Remington 700 rifles – short or long action. Remington (remarms.com) J&A Outdoors – Firearm Solutions – …
