Category: Defiance Machine

Defiance Machine

Defiance actions

Showing all 25 results

Manners EH1 M5 DBM
$959.99
Manners Eh1 M5 DBM rifle stock

swamp camo finish

RIGHT hand

Inlet for defiance long actions (remington 700 long actions & clones will fit, the ejection ports cutout may be slightly off, however footprint is the same)

Barrel channel is inlet for Proof Sendero Contour

Hawkins M5 Detachable box magazine CIP+ length bottom metal anodized black included WITH pillars (pillars are NOT installed).

This bottom metal accepts CIP length (3.850 magazines) We recommend MDT or Accurate magazines for this application!

Perfect setup for 28/30/33 nosler family, RUM’s, Weatherby’s etc!

3 flush cups installed, (1 Bottom Rear, 1 Left Front, 1 Left Rear)

Bipod Rail Included with mounting hardware.

Due to so many variances in rifles/barreled actions Some minor fitting may be required to fit this rifle/bottom metal kit to your barreled action.
Add to cart
Anti-X
$1,380.00 – $1,530.00

***MUST SHIP TO FFL*** J&A Outdoors LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without a valid FFL. It is the buyer’s responsibility to check and comply with local, state, and federal laws. The buyer …

Anti-XRead More

Select options
Ruckus Ultralight
$1,230.00 – $1,280.00

New from Defiance Machine comes the RUCKUS action. Sure to quickly become a favorite among the precision rifle community, the new Defiance RUCKUS is packed full of features that are sure to endear it to shooters everywhere. With headspace guaranteed to be +/- .001″, the Defiance RUCKUS will be able to accept pre-barrels …

Ruckus UltralightRead More

Select options
MCMILLAN GAME SCOUT – REMINGTON 700 LONG ACTION
$599.99
DESCRIPTION

The Game Scout design is a duplicate of the Remington Classic stock but with the popular A-3 vertical pistol grip. This gives McMillan A-series stock owners a smooth transition from their tactical stock to a compact hunting stock. It is an ambidextrous stock and is inletted for right hand Remington 700 type actions and for standard and magnum barrel contours.

LONG ACTION

Duplicate of the Remington Classic stock with the popular A-3 vertical pistol grip

FINISH: Black with Grey Speckles

Sleek light weight sporter stock with textured grip areas

No cheek piece so it is ambidextrous

Designed as a drop in fit for Remington 700 action

Fits standard and magnum contour barrels

Machined in aluminum pillar bedding

1″ Pachmayr Decelerator recoil pad

BDL hinged floor plate design

13.5″ LOP

2 lbs
Read more
Manners EH1 Swamp Camo w/M5 Bottom Metal
$959.99

Manners EH1 in swamp camo finish

RIGHT hand

Inlet for defiance long actions (remington 700 long actions & clones will fit, the ejection ports cutout may be slightly off, however footprint is the same)

Barrel channel is inlet for Proof Sendero Contour

Hawkins M5 oberndorf bottom metal anodized black included WITH pillars (pillars are NOT installed).

3 flush cups installed, (1 Bottom Rear, 1 Left Front, 1 Left Rear)

Bipod Rail Included with mounting hardware.

Read more
GAME HUNTER – REMINGTON 700 LA BDL
$669.99
Fitment:

Remington 700 long action (and clones)

RIGHT HAND

BDL bottom metal inlet

Proof Sendero Lite barrel channel

DESCRIPTION

The Game Hunter combines the features of the most popular stocks in the McMillan hunting line up. It has a high Monte Carlo style cheek piece similar to the McMillan Hunter, the vertical pistol grip from the Game Scout and a streamlined forend that can accommodate large contour barrels. The addition of the higher cheek comb allows the use of scopes with larger diameter bells and objective lenses.

Edge Tech filled

Similar to the popular Game Warden stock with a large fore end and vertical grip, but has an elevated Monte Carlo style cheek piece

Sleek light weight stock with textured grip areas

Designed as a drop in fit for Remington 700 with right hand bolts

Fits Remington Varmint or Proof Sendero Lite contour barrels

Machined in aluminum pillar bedding

1″ Pachmayr Decelerator recoil pad

Dual front swivel studs

BDL hinged floor plate design

13.5″ LOP

1.75 lbs
Add to cart
MCMILLAN GAME HUNTER- REMINGTON 700
$669.99 – $735.00

DESCRIPTION The Game Hunter combines the features of the most popular stocks in the McMillan hunting line up. It has a high Monte Carlo style cheek piece similar to the McMillan Hunter, the vertical pistol grip from the Game Scout and a streamlined forend that can accommodate large contour barrels. The addition of the higher …

MCMILLAN GAME HUNTER- REMINGTON 700Read More

Select options
Sale!

Remington Altitude Stock
$614.99

The Altitude series stock is designed for the hunter or shooter that wants to save weight on their rifle without sacrificing strength, durability and still have a full figured stock. Utilizing layers of carbon fiber and a lightweight super strong fill and weighing approximately 25 ounces is what sets the Altitude series above its fiberglass …

Remington Altitude StockRead More

Select options
Sale!

TriggerTech Field Trigger
$89.99

Trigger Tech Field Trigger adjustable from 2.5-5.0 Lbs.

RIGHT HAND

NO BOLT RELEASE

PVD COATED black curved shoe.

This is a brand new Take off from a brand new Christensen rifle.

This trigger is intended for remington 700 & 700 clones that HAVE SIDE BOLT RELEASE.

If your remington 700 / remington 700 clone has the bottom bolt release in front of your trigger and does NOT have a side bolt release – THIS TRIGGER WILL NOT WORK!!!!

***There is small handling marks on the left side of the trigger from removal***

Read more
TriggerTech Special Trigger
$189.99

DESCRIPTION

The Rem 700 Special is an upgraded version of the Primary model which further enhances accuracy and precision on any Remington 700 model rifle.

RIGHT HAND -Curved trigger shoe. With bolt release.

FITMENT:

remington 700’s right hand

Intended Use

Benchrest, competition, precision shooting, military, law enforcement, long range hunting, F Class, rugged hunting, harsh environments operations, target shooting, ultra long range, varmint hunting.

Trigger Control Details

Trigger Lever Type: Straight, Curved or Pro Curved

Trigger Action: Single Stage

FRT: Yes

TKR Technology: Yes

CLKR Technology: Yes

Overtravel: Sub .015″

Pull Weight: 1.0lbs-3.5lbs

Bolt Release: With or Without

Safety: With (removable)

Hand: Right

Warranty: Product lifetime

Weapon Platform: Remington 700

Material Details

Housing: 7075 Aluminum (anodized)

Key Components: 440C Stainless Steel

PVD Black (+$10) – PVD stands for Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.

Full Description

The Rem 700 Special is an upgraded version of the Primary model which further enhances accuracy and precision on any Remington 700 model rifle. Utilizing CLKR Technology™, and some additional hand refinements, the pull weight on the Special model is quickly and confidently adjusted from 1.0 – 3.5 lbs in ~1oz increments from an externally accessible set screw. Due to the exceptionally crisp break, most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured weight. Just like the Primary model, this drop-in trigger provides a true zero-creep break, extremely short overtravel and offers outstanding reliability, even in the harshest environments. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.

All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***

Add to cart
Triggertech Primary Trigger
$149.99

Right hand

curved shoe

bolt realease included

Fits remington 700’s & clones

The Rem 700 Primary is the ideal upgrade to improve accuracy and precision on any Remington 700 model rifle.

DESCRIPTION & Intended Use

Competition, precision shooting, military, law enforcement, long range hunting, rugged hunting, harsh environments operations, target shooting, varmint hunting.

Trigger Control Details

Trigger Lever Type: Straight or Curved

Trigger Action: Single Stage

FRT: Yes

TKR Technology: Yes

CLKR Technology: Yes

Overtravel: Sub .015″

Pull Weight: 1.5lbs-4.0lbs

Bolt Release: With or Without

Safety: With (removable)

Hand: Right

Warranty: Product lifetime

Weapon Platform: Remington 700

Material Details

Housing: 7075 Aluminum (anodized)

Key Components: 440C Stainless Steel

PVD Black (+$10) – PVD stands for Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.

Full Description

The Rem 700 Primary is the ideal upgrade to improve accuracy and precision on any Remington 700 model rifle. Featuring TriggerTech’s Frictionless Release Technology™, this drop-in trigger provides a true zero-creep break, extremely short over-travel and offers outstanding reliability, even in the harshest environments. Utilizing CLKR Technology™, the pull weight is quickly and confidently adjusted from 1.5 – 4.0 lbs in 1oz increments from an externally accessible set screw. Due to the exceptionally crisp break,most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured pull weight. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.

All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***

Add to cart
Sale!

Triggertech Primary Trigger Independence Day Edition
$129.99

Independence day special edition

Right hand

curved shoe

bolt realease included

Fits remington 700’s & clones

The Rem 700 Primary is the ideal upgrade to improve accuracy and precision on any Remington 700 model rifle.

DESCRIPTION & Intended Use

Competition, precision shooting, military, law enforcement, long range hunting, rugged hunting, harsh environments operations, target shooting, varmint hunting.

Trigger Control Details

Trigger Lever Type: Straight or Curved

Trigger Action: Single Stage

FRT: Yes

TKR Technology: Yes

CLKR Technology: Yes

Overtravel: Sub .015″

Pull Weight: 1.5lbs-4.0lbs

Bolt Release: With or Without

Safety: With (removable)

Hand: Right

Warranty: Product lifetime

Weapon Platform: Remington 700

Material Details

Housing: 7075 Aluminum (anodized)

Key Components: 440C Stainless Steel

PVD Black (+$10) – PVD stands for Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.

Full Description

The Rem 700 Primary is the ideal upgrade to improve accuracy and precision on any Remington 700 model rifle. Featuring TriggerTech’s Frictionless Release Technology™, this drop-in trigger provides a true zero-creep break, extremely short over-travel and offers outstanding reliability, even in the harshest environments. Utilizing CLKR Technology™, the pull weight is quickly and confidently adjusted from 1.5 – 4.0 lbs in 1oz increments from an externally accessible set screw. Due to the exceptionally crisp break,most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured pull weight. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.

All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***

Read more
TriggerTech Diamond Flat straight
$274.99

Right Hand

Flat trigger shoe

NO BOLT RELEASE

Fits remington 700’s & clone actions.

The TriggerTech Diamond Rem 700 Trigger (for cloned actions only) was designed to meet the requirements of leading competitive shooters with the help of the K&M Shooting Team and several leading R700 Clone Action Manufacturers. The Diamond features a pull weight range of less than 4 oz to 32 oz, our new Variable Rate Adjustment Technology and the new Pro Curved trigger lever. Our shooters have described it is the most consistent and crisp breaking trigger they have ever felt. After feeling the crisp break on the Diamond you will immediately become aware of the creep that exists in all other triggers.

Intended Use

Precision Rifle, benchrest, competition, precision shooting, military, law enforcement, long range hunting, F Class, rugged hunting, harsh environments operations, target shooting, ultra long range, varmint hunting.

Trigger Control Details

Weapon Platform: Remington 700 Clone Actions

Trigger Lever Type: Traditional Curved, Flat Straight and Pro Curved

Trigger Action: Single Stage

FRT: Yes

TKR Technology: Yes

CLKR Technology: Yes

Overtravel: Sub .010″

Pull Weight: <4 oz – 32 oz

Bolt Release: Without

Safety: With (removable)

Hand: Right

Warranty: Product lifetime

Material Details

Housing: 7075 Aluminum (anodized)

Key Components: 440C Stainless Steel

PVD Black – PVD stands for Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.

Full Description

The first Rem 700 Diamond Trigger was shown at the 2017 NRA Show. Since then TriggerTech has worked with the K&M Shooting Team and several leading R700 Clone action manufacturers the refine the product. The Rem 700 Diamond is truly zero creep and is the most consistent and crisp breaking trigger you will ever use. The diamond will make you aware of the creep that exists in other triggers. It features new variable rate adjustment technology that enables quick and confident adjustment from <4oz – 32oz with TriggerTech’s patented CLKR Technology™. The adjustment feature utilizes externally accessible set screw and the adjustment range begins at ~0.2 oz/click from <4 oz to ~9 oz and the changes to ~1 oz click from ~9 oz to 32 oz. Due to the exceptionally crisp break, most shooters report the pull weights feeling significantly lighter than a friction based trigger of the same measured weight. Five of the critical Diamond components are assembled as matched set to enable a true zero-creep break, extremely short overtravel and offers outstanding reliability, even in the harshest environments. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.

All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***

Add to cart
TriggerTech Diamond Curved
$274.99

Right Hand

Curved trigger shoe

NO BOLT RELEASE

Fits remington 700’s & clone actions.

The TriggerTech Diamond Rem 700 Trigger (for cloned actions only) was designed to meet the requirements of leading competitive shooters with the help of the K&M Shooting Team and several leading R700 Clone Action Manufacturers. The Diamond features a pull weight range of less than 4 oz to 32 oz, our new Variable Rate Adjustment Technology and the new Pro Curved trigger lever. Our shooters have described it is the most consistent and crisp breaking trigger they have ever felt. After feeling the crisp break on the Diamond you will immediately become aware of the creep that exists in all other triggers.

Intended Use

Precision Rifle, benchrest, competition, precision shooting, military, law enforcement, long range hunting, F Class, rugged hunting, harsh environments operations, target shooting, ultra long range, varmint hunting.

Trigger Control Details

Weapon Platform: Remington 700 Clone Actions

Trigger Lever Type: Traditional Curved, Flat Straight and Pro Curved

Trigger Action: Single Stage

FRT: Yes

TKR Technology: Yes

CLKR Technology: Yes

Overtravel: Sub .010″

Pull Weight: <4 oz – 32 oz

Bolt Release: Without

Safety: With (removable)

Hand: Right & Left (+ $20)

Warranty: Product lifetime

Material Details

Housing: 7075 Aluminum (anodized)

Key Components: 440C Stainless Steel

PVD Black – PVD stands for Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.

Full Description

The first Rem 700 Diamond Trigger was shown at the 2017 NRA Show. Since then TriggerTech has worked with the K&M Shooting Team and several leading R700 Clone action manufacturers the refine the product. The Rem 700 Diamond is truly zero creep and is the most consistent and crisp breaking trigger you will ever use. The diamond will make you aware of the creep that exists in other triggers. It features new variable rate adjustment technology that enables quick and confident adjustment from <4oz – 32oz with TriggerTech’s patented CLKR Technology™. The adjustment feature utilizes externally accessible set screw and the adjustment range begins at ~0.2 oz/click from <4 oz to ~9 oz and the changes to ~1 oz click from ~9 oz to 32 oz. Due to the exceptionally crisp break, most shooters report the pull weights feeling significantly lighter than a friction based trigger of the same measured weight. Five of the critical Diamond components are assembled as matched set to enable a true zero-creep break, extremely short overtravel and offers outstanding reliability, even in the harshest environments. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.

All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***

Add to cart
Sale!

HAWKINS ALUMINUM OBERNDORF BDL BOTTOM METAL
$154.99 – $165.99
Oberndorf Bottom Metals

Lightweight and premium quality, the Hawkins Precision Oberndorf Bottom Metal is a CNC-machined masterpiece. Our patented cantilever spring release ensures the floorplate will not open under heavy recoil for large magnum caliber rifles. Our Oberndorf bottom metal is extremely popular for lightweight, long range hunting rifle builds.

Available for Remington 700 (and REM 700 clones) in short action and long action.

Available as a kit with action screws and follower.

Long action bottom metal weighs 2.6oz, short action weighs 2.5oz
Select options
Remington 700 Bottom Metal
$129.00 – $145.00

DESCRIPTION

Check out our new BDL style bottom metal! Quality CNC machined aluminum assembly that is a direct replacement to the Remington OEM style bottom metal.

Remington style BDL, hinged floorplate bottom metal. Aluminum. bare aluminum finish.

NOTE: All Remington 700 bottom metal may require minimal inletting due to the variation of stocks.

Select options
Hawkins 700 BDL Oberndorf Kit
$215.00

Select options
Action Screws
$15.50 – $16.50

Stainless Steel action screws to fit Remington 700 actions and clones that use standard 1/4″-28 TPI screws. These screws are slightly long and are designed to be a “trim-to-fit” screw. Uses a T27 Torx bit. Available in a stainless finish or a black Melonite finish.

Select options
BDL ACTION SCREW SET – REMINGTON 700
$7.00 – $8.00

Select options
Sale!

DEFIANCE Prefit Barrels PROOF Research Carbon Fiber
$879.00

Defiance Pre-fit Barrel’s These will work for the following defiance actions: Ruckus, Anti, Anti-X and the tenacity with integral recoil lug (tenacity MUST have integral lug) The Proof Research Defiance Ruckus Pre-Fit Carbon Fiber Barrel features unprecedented accuracy, performance, and relentless excellence. The carbon fiber and steel barrels for Defiance Ruckus were designed …

DEFIANCE Prefit Barrels PROOF Research Carbon FiberRead More

Select options
Remington Box Magazine’s
$24.99 – $89.99

Replacement magazine boxes for remington 700 ADL & BDL rifles in both short and long action configurations.

Stainless Steel Construction.

The feed lips will need to be tuned to your cartridge for precise feeding.

Select options
Sale!

ADL/BDL Magazine Spring
$9.99 – $19.99

OEM Follower spring that fits Remington 700 ADL & BDL rifles.

Select options
Long action follower
$27.00

Remington 700 Long Action Follower. Condition is “New”. Shipped with USPS First Class.

This is a Wyatt’s outdoor follower.

Anodized black.

This fits remington 700 & Clone long actions.

The beauty of the wyatt outdoor follower is they made this to fit ANY long action cartridge! 25-06, 270, 280, 30-06 – 7 rem mag, 300 win mag, 338 win mag, RUM’s, H&H, etc.

This Fits OEM Remington magazine box & spring!

Add to cart
Short action follower
$27.00

Remington 700 Short action Follower. Condition is “New”. Shipped with USPS First Class.

Wyatts outdoor Short action standard follower.

Anodized black.

This fits remington 700 SHORT & Clone actions.

Follower has been made to fit STANDARD OEM magazine length boxes.

This will work for cartridges such as; 22-250,243,260,7-08,6.5 creedmoor, 308.

Fits the OEM Remington magazine box & spring!

Add to cart
Sale!

Hawkins 30mm Low Scope Rings
$159.99

Fitment:

Main Tube diameter: 30MM

Ring height: LOW .885 (see image for height measurements)

DESCRIPTION

Ultra-light tactical scope rings from Hawkins Precision are made in America out of a single billet of 6061 T6 aluminum. These fully machined rings feature a rigid, corrosion-resistant, black anodized finish. Machined with a clamp made from 7075 aluminum, these scope rings deliver extra strength and grip where it counts. And the ultra-light design frees you from carrying unnecessary bulk. Hawkins Precision scope rings come standard with an anti-cant level cap and are available in 30mm and 34mm, sized in low, medium, and high.

Size Measurement from Picatinny Rail
to optical center 30mm Application

Low .885″ * 50mm objective with standard barrel contours

Torque Specifications

Check the torque recommendations for your rifle scope before using these recommendations.
*Ring top screws: 25-in-lb.
*Base cross bolts: 65-in-lb.

Read more