Top rated products
-
T3x WSM short action
$775.00
-
Hawkins 30mm Low Scope Rings
$167.00
-
Trigger Pins
$7.95
-
6.5 Creedmoor
$70.00
-
Savage Large Shank Nut & Lug
$29.99
Category: Remington Actions & Accessories
Remington Actions & Accessories
Showing 1–32 of 40 results
-
Sale!
Long Action Magnum
$905.00 – $950.00Select options***MUST SHIP TO FFL*** J&A Outdoors LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without a valid FFL. It is the buyer’s responsibility to check and comply with local, state, and federal laws. The buyer …
-
Sale!
Short Action Magnum
$915.00 – $950.00Select options***MUST SHIP TO FFL*** J&A Outdoors LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without a valid FFL. It is the buyer’s responsibility to check and comply with local, state, and federal laws. The buyer …
-
Sale!
Short Action 308
$925.00 – $939.99Select optionsChristensen Short Action 308 Stainless steel cerakote black. BDL bottom metal assembly included. Triggertech field trigger adjustable from 2.5-5 pounds. ***MUST SHIP TO FFL*** J&A Outdoors LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without …
-
Sale!
Stripped Actions
$119.99 – $315.00Select optionsRemington 700 & Christensen Arms Stripped Actions Many of these stripped actions are new take off’s. Please note, that in some rare instances there may be minor marks from barrel removal. Remington & Christensen bolt assemblies can be found here: https://jaoutdoors.com/product/remington-700-bolts/ J&A Outdoors – Firearm Solutions – Shooting Products (jaoutdoors.com) ***MUST SHIP …
-
Sale!
Hawkins Oberndorf Bottom Metal
$197.00 – $201.00Select optionsOberndorf Bottom Metals
Lightweight and premium quality, the Hawkins Precision Oberndorf Bottom Metal is a CNC-machined masterpiece. Our patented cantilever spring release ensures the floorplate will not open under heavy recoil for large magnum caliber rifles. Our Oberndorf bottom metal is extremely popular for lightweight, long range hunting rifle builds.
- Available for Remington 700 (and REM 700 clones) in short action and long action.
- Available as a kit with action screws and follower.
- Long action bottom metal weighs 2.6oz, short action weighs 2.5oz
-
Sale!
Mesa Altitude Remington Stock
$625.00Select optionsMesa Altitude Remington Stock The Mesa Altitude series Remington stock is designed for the hunter or shooter that wants to save weight on their rifle without sacrificing strength, durability and still have a full-figured stock. Utilizing layers of carbon fiber and a lightweight super strong fill and weighing approximately 25 ounces is what sets the …
-
Sale!
Hawkins 30mm Low Scope Rings
$167.00Add to cartFitment:
Main Tube diameter: 30MM
Ring height: LOW .885 (see image for height measurements)
DESCRIPTION
Ultra-light tactical scope rings from Hawkins Precision are made in America out of a single billet of 6061 T6 aluminum. These fully machined rings feature a rigid, corrosion-resistant, black anodized finish. Machined with a clamp made from 7075 aluminum, these scope rings deliver extra strength and grip where it counts. And the ultra-light design frees you from carrying unnecessary bulk. Hawkins Precision scope rings come standard with an anti-cant level cap and are available in 30mm and 34mm, sized in low, medium, and high.
Size Measurement from Picatinny Rail
to optical center30mm Application Low .885″ * 50mm objective with standard barrel contours Torque Specifications
Check the torque recommendations for your rifle scope before using these recommendations.
*Ring top screws: 25-in-lb.
*Base cross bolts: 65-in-lb. -
XLR 4.0 PRE-ORDER
$1,355.00 – $1,415.00Select optionsXLR 4.0 Pre-order (These chassis will arrive LATE JULY 2022)
LIMITED AVAILABILITY – SECURE YOUR CHASSIS BEFORE HUNTING SEASON!!!!
XLR Element 4.0 Magnesium Chassis
Element 4.0 Magnesium Chassis
Carbon Fiber Ultralight Pistol Grip
Ultralight Carbon Fiber Folding Butt Stock
XLR adjustable Thumb Rest
Carbon Buttstock Bag Rider
-
Sale!
Remington 700 Actions
$450.00 – $565.00Select optionsRemington 700 Actions Our Remington 700 Actions are available in a variety of finishes. The Chromoly Blued receivers come direct from Remington as “bare receivers”, our matte black receivers are take off’s – please note that in some minor cases our matte finished receivers may have very minor marks from disassembly. For Stripped receivers …
-
Remington Model 7 Action
$700.00Read moreRemington Model 7 Action
- Brand new
- Stainless steel
- .473 bolt face (works for calibers like 22-250,243,6.5 creedmoor, 7mm-08, 308 etc.)
- Short action
- RR prefix
- Factory trigger
- Factory bottom metal
Important to note– there may be handling marks from barrel removal, these actions come brand new unfired – however, please note in some instances there will be minor handling marks from disassembly.
-
Sale!
Christensen Bottom Metal
$125.00 – $199.99Select optionsChristensen Bottom Metal Christensen Arms BDL bottom metal assembly’s available in both SHORT and LONG configurations. Return Policy: Buyer has 14 days from date of delivery to return item. All Returns are subject to a 20% restocking fee no exceptions, item must be in new unused/unopen condition in original …
-
Sale!
Remington bolt stop kit extended
$55.00Add to cartRemington 700 bolt stop extended right hand with bolt release spring and trigger pins.
This fits Remington 700’s – right hand ONLY.
This is an extended length bolt stop that allows your bolt to reach farther back for Wyatt extended magazines – OR – you can run this on a factory Remington 700 without issues as well!
Stainless trigger pins
OEM remington bolt release return spring.
This fits short and long action RIGHT HAND remington model 700’s.
-
Remington 700 Bolt Stop
$26.99Add to cartremington 700 bolt stop extended.
This fits remington 700’s – right or left hand.
This is a extended length bolt stop that allows your bolt to reach farther back for wyatt extended magazines – OR – run this on a factory remington 700 without issues!
This fits short and long action remington model 700’s.
-
Sale!
Remington 700 Stocks
$65.00 – $80.00Select optionsFactory Remington 700 Stocks. ADL/BDL configurations in both long and short action variants. Return Policy: Buyer has 14 days from date of delivery to return item. All Returns are subject to a 20% restocking fee no exceptions, item must be in new unused/unopen condition in original packaging. buyer must pay for …
-
Manners EH1 M5 DBM
$959.99Read moreManners Eh1 M5 DBM rifle stock
- swamp camo finish
- RIGHT hand
- Inlet for defiance long actions (remington 700 long actions & clones will fit, the ejection ports cutout may be slightly off, however footprint is the same)
- Barrel channel is inlet for Proof Sendero Contour
- Hawkins M5 Detachable box magazine CIP+ length bottom metal anodized black included WITH pillars (pillars are NOT installed).
This bottom metal accepts CIP length (3.850 magazines) We recommend MDT or Accurate magazines for this application!
Perfect setup for 28/30/33 nosler family, RUM’s, Weatherby’s etc!
3 flush cups installed, (1 Bottom Rear, 1 Left Front, 1 Left Rear)
Bipod Rail Included with mounting hardware.
Due to so many variances in rifles/barreled actions Some minor fitting may be required to fit this rifle/bottom metal kit to your barreled action.
-
Sale!
Remington 700 Long action 30mm low
$132.00Add to cartFitment:
Remington 700 long actions
calibers:25-06, 264 win mag, 270 win, 280 rem, 280 ackley, 7 rem mag, 300 win, RUM family, etc.
Main Tube diameter: 30MM
Ring height: LOW (see image for height measurements)
Description
There is nothing on the market that compares with the Hawkins Precision Long-Range Hybrid Rings. These lightweight rings are a direct-mount, robust, 25 MOA solution for your lightweight hunting rifle. CNC-machined in the USA out of a single billet of 6061 aluminum, the Long-Range Hybrid Rings weigh between 3oz and 4oz and feature an anti-cant level cap.
Torque Specs: 25 in-lbs ring caps
-
Sale!
Remington 700 Short action 30mm low
$132.00Add to cartFitment:
Remington 700 Short actions
calibers: 204 ruger, 222, 223, 243,257 roberts, 260 remington, 6.5 creedmoor,7mm-08,308.
Main Tube diameter: 30MM
Ring height: LOW (see image for height measurements)
Description
There is nothing on the market that compares with the Hawkins Precision Long-Range Hybrid Rings. These lightweight rings are a direct-mount, robust, 25 MOA solution for your lightweight hunting rifle. CNC-machined in the USA out of a single billet of 6061 aluminum, the Long-Range Hybrid Rings weigh between 3oz and 4oz and feature an anti-cant level cap.
Torque Specs: 25 in-lbs ring caps
-
TriggerTech Special Trigger
$199.99Add to cartDESCRIPTIONThe Rem 700 Special is an upgraded version of the Primary model which further enhances accuracy and precision on any Remington 700 model rifle.
RIGHT HAND -Curved trigger shoe. With bolt release.
FITMENT:
remington 700’s right hand
Intended Use
Benchrest, competition, precision shooting, military, law enforcement, long range hunting, F Class, rugged hunting, harsh environments operations, target shooting, ultra long range, varmint hunting.
Trigger Control Details
Trigger Lever Type: Straight, Curved or Pro CurvedTrigger Action: Single StageFRT: YesTKR Technology: YesCLKR Technology: YesOvertravel: Sub .015″Pull Weight: 1.0lbs-3.5lbsBolt Release: With or WithoutSafety: With (removable)Hand: RightWarranty: Product lifetimeWeapon Platform: Remington 700Material Details
Housing: 7075 Aluminum (anodized)Key Components: 440C Stainless SteelPVD Black (+$10) – PVD stands for Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.Full Description
The Rem 700 Special is an upgraded version of the Primary model which further enhances accuracy and precision on any Remington 700 model rifle. Utilizing CLKR Technology™, and some additional hand refinements, the pull weight on the Special model is quickly and confidently adjusted from 1.0 – 3.5 lbs in ~1oz increments from an externally accessible set screw. Due to the exceptionally crisp break, most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured weight. Just like the Primary model, this drop-in trigger provides a true zero-creep break, extremely short overtravel and offers outstanding reliability, even in the harshest environments. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.
All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***
-
Triggertech Primary PVD Black
$169.99Add to cartRight handPVD black curved shoebolt release includedFits Remington 700’s & clonesThe Rem 700 Primary is the ideal upgrade to improve accuracy and precision on any Remington 700 model rifle.
DESCRIPTION & Intended Use
Competition, precision shooting, military, law enforcement, long range hunting, rugged hunting, harsh environments operations, target shooting, varmint hunting.
Trigger Control Details
Trigger Lever Type: CurvedTrigger Action: Single StageFRT: YesTKR Technology: YesCLKR Technology: YesOvertravel: Sub .015″Pull Weight: 1.5lbs-4.0lbsBolt Release: WithSafety: With (removable)Hand: RightWarranty: Product lifetimeWeapon Platform: Remington 700Material Details
Housing: 7075 Aluminum (anodized)Key Components: 440C Stainless SteelPVD Black- PVD stands for Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.Full Description
The Rem 700 Primary is the ideal upgrade to improve accuracy and precision on any Remington 700 model rifle. Featuring TriggerTech’s Frictionless Release Technology™, this drop-in trigger provides a true zero-creep break, extremely short over-travel and offers outstanding reliability, even in the harshest environments. Utilizing CLKR Technology™, the pull weight is quickly and confidently adjusted from 1.5 – 4.0 lbs in 1oz increments from an externally accessible set screw. Due to the exceptionally crisp break,most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured pull weight. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.
All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***
-
Triggertech Primary PVD Black LEFT HAND
$189.99Add to cartLEFT handPVD black curved shoebolt release includedFits Remington 700’s & clonesThe Rem 700 Primary is the ideal upgrade to improve accuracy and precision on any Remington 700 model rifle.
DESCRIPTION & Intended Use
Competition, precision shooting, military, law enforcement, long range hunting, rugged hunting, harsh environments operations, target shooting, varmint hunting.
Trigger Control Details
Trigger Lever Type: CurvedTrigger Action: Single StageFRT: YesTKR Technology: YesCLKR Technology: YesOvertravel: Sub .015″Pull Weight: 1.5lbs-4.0lbsBolt Release: WithSafety: With (removable)Hand: RightWarranty: Product lifetimeWeapon Platform: Remington 700Material Details
Housing: 7075 Aluminum (anodized)Key Components: 440C Stainless SteelPVD Black- PVD stands for Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.Full Description
The Rem 700 Primary is the ideal upgrade to improve accuracy and precision on any Remington 700 model rifle. Featuring TriggerTech’s Frictionless Release Technology™, this drop-in trigger provides a true zero-creep break, extremely short over-travel and offers outstanding reliability, even in the harshest environments. Utilizing CLKR Technology™, the pull weight is quickly and confidently adjusted from 1.5 – 4.0 lbs in 1oz increments from an externally accessible set screw. Due to the exceptionally crisp break,most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured pull weight. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.
All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***
-
Triggertech Primary Trigger
$159.99Add to cartRight handcurved shoebolt realease includedFits remington 700’s & clonesThe Rem 700 Primary is the ideal upgrade to improve accuracy and precision on any Remington 700 model rifle.
DESCRIPTION & Intended Use
Competition, precision shooting, military, law enforcement, long range hunting, rugged hunting, harsh environments operations, target shooting, varmint hunting.
Trigger Control Details
Trigger Lever Type: Straight or CurvedTrigger Action: Single StageFRT: YesTKR Technology: YesCLKR Technology: YesOvertravel: Sub .015″Pull Weight: 1.5lbs-4.0lbsBolt Release: With or WithoutSafety: With (removable)Hand: RightWarranty: Product lifetimeWeapon Platform: Remington 700Material Details
Housing: 7075 Aluminum (anodized)Key Components: 440C Stainless SteelPVD Black (+$10) – PVD stands for Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.Full Description
The Rem 700 Primary is the ideal upgrade to improve accuracy and precision on any Remington 700 model rifle. Featuring TriggerTech’s Frictionless Release Technology™, this drop-in trigger provides a true zero-creep break, extremely short over-travel and offers outstanding reliability, even in the harshest environments. Utilizing CLKR Technology™, the pull weight is quickly and confidently adjusted from 1.5 – 4.0 lbs in 1oz increments from an externally accessible set screw. Due to the exceptionally crisp break,most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured pull weight. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.
All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***
-
TriggerTech Diamond Flat straight
$289.99Add to cartRight Hand
Flat trigger shoe
NO BOLT RELEASE
Fits remington 700’s & clone actions.
The TriggerTech Diamond Rem 700 Trigger (for cloned actions only) was designed to meet the requirements of leading competitive shooters with the help of the K&M Shooting Team and several leading R700 Clone Action Manufacturers. The Diamond features a pull weight range of less than 4 oz to 32 oz, our new Variable Rate Adjustment Technology and the new Pro Curved trigger lever. Our shooters have described it is the most consistent and crisp breaking trigger they have ever felt. After feeling the crisp break on the Diamond you will immediately become aware of the creep that exists in all other triggers.
Intended Use
Precision Rifle, benchrest, competition, precision shooting, military, law enforcement, long range hunting, F Class, rugged hunting, harsh environments operations, target shooting, ultra long range, varmint hunting.
Trigger Control Details
Weapon Platform: Remington 700 Clone ActionsTrigger Lever Type: Traditional Curved, Flat Straight and Pro CurvedTrigger Action: Single StageFRT: YesTKR Technology: YesCLKR Technology: YesOvertravel: Sub .010″Pull Weight: <4 oz – 32 ozBolt Release: WithoutSafety: With (removable)Hand: RightWarranty: Product lifetimeMaterial Details
Housing: 7075 Aluminum (anodized)Key Components: 440C Stainless SteelPVD Black – PVD stands for Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.Full Description
The first Rem 700 Diamond Trigger was shown at the 2017 NRA Show. Since then TriggerTech has worked with the K&M Shooting Team and several leading R700 Clone action manufacturers the refine the product. The Rem 700 Diamond is truly zero creep and is the most consistent and crisp breaking trigger you will ever use. The diamond will make you aware of the creep that exists in other triggers. It features new variable rate adjustment technology that enables quick and confident adjustment from <4oz – 32oz with TriggerTech’s patented CLKR Technology™. The adjustment feature utilizes externally accessible set screw and the adjustment range begins at ~0.2 oz/click from <4 oz to ~9 oz and the changes to ~1 oz click from ~9 oz to 32 oz. Due to the exceptionally crisp break, most shooters report the pull weights feeling significantly lighter than a friction based trigger of the same measured weight. Five of the critical Diamond components are assembled as matched set to enable a true zero-creep break, extremely short overtravel and offers outstanding reliability, even in the harshest environments. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.
All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***
-
TriggerTech Diamond Curved
$289.99Add to cartRight Hand
Curved trigger shoe
NO BOLT RELEASE
Fits remington 700’s & clone actions.
The TriggerTech Diamond Rem 700 Trigger (for cloned actions only) was designed to meet the requirements of leading competitive shooters with the help of the K&M Shooting Team and several leading R700 Clone Action Manufacturers. The Diamond features a pull weight range of less than 4 oz to 32 oz, our new Variable Rate Adjustment Technology and the new Pro Curved trigger lever. Our shooters have described it is the most consistent and crisp breaking trigger they have ever felt. After feeling the crisp break on the Diamond you will immediately become aware of the creep that exists in all other triggers.
Intended Use
Precision Rifle, benchrest, competition, precision shooting, military, law enforcement, long range hunting, F Class, rugged hunting, harsh environments operations, target shooting, ultra long range, varmint hunting.
Trigger Control Details
Weapon Platform: Remington 700 Clone ActionsTrigger Lever Type: Traditional Curved, Flat Straight and Pro CurvedTrigger Action: Single StageFRT: YesTKR Technology: YesCLKR Technology: YesOvertravel: Sub .010″Pull Weight: <4 oz – 32 ozBolt Release: WithoutSafety: With (removable)Hand: Right & Left (+ $20)Warranty: Product lifetimeMaterial Details
Housing: 7075 Aluminum (anodized)Key Components: 440C Stainless SteelPVD Black – PVD stands for Physical Vapour Deposition. It is a hard and durable coating that is applied to external stainless components to give them a clean black color.Full Description
The first Rem 700 Diamond Trigger was shown at the 2017 NRA Show. Since then TriggerTech has worked with the K&M Shooting Team and several leading R700 Clone action manufacturers the refine the product. The Rem 700 Diamond is truly zero creep and is the most consistent and crisp breaking trigger you will ever use. The diamond will make you aware of the creep that exists in other triggers. It features new variable rate adjustment technology that enables quick and confident adjustment from <4oz – 32oz with TriggerTech’s patented CLKR Technology™. The adjustment feature utilizes externally accessible set screw and the adjustment range begins at ~0.2 oz/click from <4 oz to ~9 oz and the changes to ~1 oz click from ~9 oz to 32 oz. Due to the exceptionally crisp break, most shooters report the pull weights feeling significantly lighter than a friction based trigger of the same measured weight. Five of the critical Diamond components are assembled as matched set to enable a true zero-creep break, extremely short overtravel and offers outstanding reliability, even in the harshest environments. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.
All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***
-
Remington 700 Bottom Metal
$129.00 – $220.00Select optionsRemington 700 Bottom Metal Remington 700 Bottom Metal. OEM & Aftermarket available. Short & long action. Factory drop in fit. Get your Remington 700 parts here! Model 700 | Remington (remarms.com) J&A Outdoors – Firearm Solutions – Shooting Products (jaoutdoors.com) Return Policy: Buyer has 14 days from date of delivery to return item. All Returns …
