Cart

Your Cart is Empty

Back To Shop

Category: Atlas bipods & accessories

Atlas Bipods & Accessories.

 

 

Here at J&A Outdoors Firearm Solutions we carry Atlas Bipods in a variety of configurations along with a wide assortment of Accessories.

 

 

 

Atlas Bipod Models:

V8 – BT10 and BT-LW17

PSR – BT46-LW17 (Standard height) as well as the BT47-LW17 (Tall Height)

 

 

 

Atlas Accessories:

BT1517-Bipod rail fastener kit

BT15-3.35” bipod rail

BT17-4” bipod rail

BT22-3″ Leg extensions

BT32-Rubber feet

BT64-Spiked cleat feet

BT74-Raider cleat feet

 

 

 

Atlas warranty:

Atlas strives to build the best products with durability and longevity in mind, life happens: things break. So they offer the following warranty:

If you own an authentic B&T/Atlas product and it
breaks – or in the event that YOU break it, we’ll repair or replace it.

This applies to the authentic, made in America B&T/Atlas products including those that have been refinished then assembled with the atlas proof mark. If you or someone else disassembled, coated, then reassembled the product that broke, Atlas will repair it for $75.00 plus parts minimum.

Please Note: B&T Industries LLC’s warranty does not apply to counterfeit, copy, fake or knockoff Atlas Bipods.

Showing all 18 results

  • BT47-LW17 PSR Atlas Bipod

    $374.95

    BT47-LW17 PSR Atlas Bipod: Tall with ADM 170-S Lever

    The BT47-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.

    It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.

    The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).

    • Height Range: 6.4 – 12.8″ (8.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5″ diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 15.13 ounces approx.
    • Footprint: 10-14.5″

     

     

    Read more
  • BT46-LW17 PSR Atlas Bipod

    $354.95

    BT46-LW17 PSR Atlas Bipod: Standard height with ADM 170-S Lever

    The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.

    It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.

    Selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System. NSN 1005-01-663-0038

    • Height Range: 5.2 – 9.6″ (6.8” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5″ diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 13.61 ounces approx.
    • Footprint: 8–11″

     

    Read more
  • BT10 V8 Atlas Bipod

    $229.95
    [embed]https://youtu.be/CzIhQ-_JEhs[/embed]
    Read more
  • BT10-LW17 V8 Atlas Bipod

    $294.95

    BT10-LW17 V8 Atlas Bipod

    The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.

    It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.

    NSN 1005-01-623-6257

    • Height Range: 5.2 – 9.6″ (6.8” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.36″ diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Weight: 12.7 ounces approx.
    • Footprint: 8–11″

     

    Read more
  • BT74: Atlas Raider Cleat Feet

    $64.00

    BT74: Atlas Raider Cleat Feet

    The BT74 Atlas Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit V8PSR and CAL model Atlas Bipods, as well as adaptors that use our feet. Easily installed with the press of a stainless steel plunger.

    The Cleat portion is approximately 0.75” long with the largest outer diameter of approximately 1.155”. Sold as a pair. Available in raw stainless steel only.

    Total Weight of Pair: 2.65 ounces

    Product will work on V8, PSR and CAL models only.

     

     

    Read more
  • Arca – Picatinny Mount

    $55.00$64.99

    Made in the USA by hard working Americans!

    10-32 fasteners included with Tee nuts.

    Select options
  • Arca Picatinny Hybrid Rail Mount

    $85.00$99.99

    Made in the USA by hard working Americans!

    Semi Rounded bottom to fit many different variations of stocks.

    Integrated Sling Stud.

    3.25 Ounces

    Each Arca picatinny hybrid rail comes with 4 sets of 10-32 screws and Tee nuts.

    Select options
  • 4.5” Bipod Picatinny Mount

    $25.00$40.00

    MADE IN THE USA!

    4.5” Bipod Picatinny Mount.

    Constructed from Billet Aluminum.

    1 ounce weight

    QD Cup machined into the mount along with sling swivel stud.

    This 4.5” picatinny bipod Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5″ with a Semi Rounded Bottom to accommodate many chassis/surfaces.

     

     

    Select options
  • Mini 1.75” Arca Rail Mount

    $28.99$39.99

    Made in the USA by hard working Americans! 

    • 1.75” arca rail Rifle Mount.
    • Billet aluminum construction.
    • Anodized black.
    • Flat bottom or semi rounded bottom available.
    • Weight: .55 ounces.
    • Compatible with Arca Swiss style tripod heads.
    • Overall length: 1.75” OAL
    • Bolt/Mount spacing up to 1.2 inches.
    • 10-32 fasteners with tee nuts included for installation.
    Select options
  • 3” Arca Rail Mount

    $37.99

    Made in the USA by hard working Americans!

    • 3” arca rail Rifle Mount.
    • Billet aluminum construction.
    • Anodized black.
    • Flat bottom with a small radius in the center to accommodate a multitude of stock designs.
    • Weight: .85 ounces.
    • Compatible with Arca Swiss style tripod heads.
    • Overall length: 3.0” OAL
    • Bolt/Mount spacing up to 1.2 inches.
    • 10-32 fasteners with tee nuts included for installation.
    Add to cart
  • 4” Arca Balance Rail Mount

    $42.99$57.00

    Made in the USA by hard working Americans!

    • 4” arca balance rail mount.
    • Available in anodized black, burnt bronze or tungsten cerakote.
    • Perfect balance point for mounting just forward of front action screw.
    • Billet aluminum construction.
    • Flat or semi rounded bottom available.
    • Weight: 1.25 ounces.
    • Compatible with Arca Swiss style tripod heads.
    • Overall length: 4.0” OAL
    • 10-32 fasteners with tee nuts included for installation.
    Select options
  • Rail Mounting Fastener Set

    $5.00

    Rail Mounting Fastener Set

    Rail Mounting Fastener Set is used for mounting 1913 rails or Arca Mounts that consists of two (2) 10-32 T-Nuts and two (2) 10-32 x ¾” Screws. Sold as a pair. (Screw head can change from Torx to Hex. Subject to availability).

    Weight: 0.4 ounces

     

    Add to cart
  • Atlas BT81 LIL’ BRANDI

    $49.99

    Atlas BT81 LIL’ BRANDI The BT81 Lil’ Brandi is our long-awaited answer to getting a 1913 Picatinny Rail mounted on a traditional rifle stock without taking the rifle apart, drilling holes or damaging the stock. Installation utilizes the existing sling stud and provided cross pin, set screw and hex wrench. It features 3 usable slots …

    Atlas BT81 LIL’ BRANDIRead More

    Read more
  • BT17: 4″ 1913 Picatinny Rail

    $29.95

    BT17: 4″ 1913 Picatinny Rail

    The BT17 – 4″ 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5″ with a FLAT back to accommodate flat surfaces.

    A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE IS INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks.

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.

    Weight: 1.20 ounces

    Read more
  • BT15: 3.35″ 1913 Picatinny Rail

    $19.95

    BT15: 3.35″ 1913 Picatinny Rail

    The BT15 – 3.35″ 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78″ and a relieved back to accommodate curved surfaces.

    A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE IS INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks.

    Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.

    Weight: 0.92 ounces

    Read more
  • 3.5 Bipod Rail

    $40.00

    3.5 Bipod Rail

    Sling stud or Quick detach cups integrated into the rail.

     

    Overall length of 3.50 inches.

     

    Bolt spacing: 1.250”- 2.50” (these are NOT the rail you want for factory installed DUAL swivels)

     

    Mounting HARDWARE IS INCLUDED. (10-32 screws w/fastener)

     

    weight is .60 ounces.

    Read more
  • BT22 Leg Extensions

    $49.99

    BT22: Atlas Leg Extensions

    The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369

    Weight: 1.8 ounces

    Product will work on V8, PSR and CAL models only.

    Read more
  • BT32: Atlas Rubber Feet

    $19.95

     

    BT32: Atlas Standard Rubber Feet

    The BT32 Atlas Standard Rubber Feet are standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only.

    Weight: 1.0 ounce

     

    These fit atlas V8, PSR & CAL bipods.

    Read more

Cart

Your Cart is Empty

Back To Shop