Top rated products
-
Triggertech Primary Trigger
$164.99
-
TriggerTech Diamond Flat Straight
$304.99
-
TriggerTech Diamond Curved
$304.99
-
BT46-LW17 PSR Atlas Bipod
$354.95
-
BT47-LW17 PSR Atlas Bipod
$374.95
Mini Arca Rail Mount
$6.99 – $34.99
Made in the USA by hard working Americans!
- 1.50” arca rail Rifle Mount.
- Billet aluminum construction.
- Black, FDE, OD Green, bronze or tungsten cerakote available!
- Semi Rounded bottom to accommodate many stock designs
- Weight: .50 ounces.
- Compatible with Arca Swiss style tripod heads.
- Overall length: 1.50” OAL
- Bolt/Mount spacing .850 inches.
- 10-32 fasteners with tee nuts included for installation.
Mini Arca Rail Mount
- 1.50” arca rail Rifle Mount.
- Billet aluminum construction.
- Black, FDE, OD Green, bronze or tungsten cerakote available!
- Semi Rounded bottom to accommodate many stock designs
- Weight: .50 ounces.
- Compatible with Arca Swiss style tripod heads.
- Overall length: 1.50” OAL
- Bolt/Mount spacing .850 inches.
- 10-32 fasteners with tee nuts included for installation.
J&A Outdoors – Firearm Solutions – Shooting Products (jaoutdoors.com)
| Configuration | Black, Bronze, OD Green, FDE, Tungsten, Extra fasteners |
|---|
Related products
-
BT74: Atlas Raider Cleat Feet
$64.00Read moreBT74: Atlas Raider Cleat Feet
The BT74 Atlas Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit V8, PSR and CAL model Atlas Bipods, as well as adaptors that use our feet. Easily installed with the press of a stainless steel plunger.
The Cleat portion is approximately 0.75” long with the largest outer diameter of approximately 1.155”. Sold as a pair. Available in raw stainless steel only.
Total Weight of Pair: 2.65 ounces
Product will work on V8, PSR and CAL models only.
-
BT10-LW17 V8 Atlas Bipod
$294.95Read moreBT10-LW17 V8 Atlas Bipod
The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.
It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.
NSN 1005-01-623-6257
- Height Range: 5.2 – 9.6″ (6.8” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.36″ diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 12.7 ounces approx.
- Footprint: 8–11″
-
Sale!
2.5” Bipod Picatinny Mount
$6.99 – $29.99Select options This product has multiple variants. The options may be chosen on the product page2.5” Bipod Rail MADE IN THE USA!
- Sling stud integrated into the rail.
- 2.50-inch overall length
- This 2.5” picatinny bipod Rail will accommodate hole patterns with a center to center spacing of .650”– 1.650″
- Semi Rounded Bottom to accommodate many chassis/surfaces.
- weight is .40 ounces.
