Category
- AB Suppressors
- ACE Barrels
- ADG BRASS
- Aero Precision
- AG Composites
- Arca – Picatinny Rails
- Atlas bipods & accessories
- Banish Suppressors
- Bargain Cave
- Benchmark Barrels
- Bergara
- Berger Bullets
- Bipods
- Bolt Knobs
- Carbon Fiber Barrels
- Cerakote Services
- Christensen Arms Actions & Accessories
- Custom Rifles
- Dead Air Silencers
- Defiance Actions
- Gun Screws
- Gunsmith Services
- Gunsmith Tools
- Gunwerks
- H-S Precision
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Kinport Peak Rifles Barrel Services
- KRG
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Meraki Machine
- Mesa Precision Arms
- Mountain Tactical
- Muzzle Brakes
- Nightforce Optics
- Norma Brass
- Optics
- Proof Research
- Pure Precision
- Redding Reloading
- Remington Actions & Accessories
- Ruger
- Savage actions & accessories
- Suppressors
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- Tricer
- TriggerTech Triggers
- Vortex Optics
- Weatherby
- Winchester
- XLR Industries
Products
- AB Suppressors
- ACE Barrels
- ADG BRASS
- Aero Precision
- AG Composites
- Arca - Picatinny Rails
- Atlas bipods & accessories
- Banish Suppressors
- Bargain Cave
- Benchmark Barrels
- Bergara
- Berger Bullets
- Bipods
- Bolt Knobs
- Carbon Fiber Barrels
- Cerakote Services
- Christensen Arms Actions & Accessories
- Custom Rifles
- Dead Air Silencers
- Defiance Actions
- Gun Screws
- Gunsmith Services
- Gunsmith Tools
- Gunwerks
- H-S Precision
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Kinport Peak Rifles Barrel Services
- KRG
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Meraki Machine
- Mesa Precision Arms
- Mountain Tactical
- Muzzle Brakes
- Nightforce Optics
- Norma Brass
- Optics
- Proof Research
- Pure Precision
- Redding Reloading
- Remington Actions & Accessories
- Ruger
- Savage actions & accessories
- Suppressors
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- Tricer
- TriggerTech Triggers
- Vortex Optics
- Weatherby
- Winchester
- XLR Industries
Top rated products
-
Triggertech Primary Trigger
$174.99
-
TriggerTech Diamond Flat Straight
$334.99
-
TriggerTech Diamond Curved
$334.99
-
BT46-LW17 PSR Atlas Bipod
$354.95
-
BT47-LW17 PSR Atlas Bipod
$374.95
Manners Long Action NIGHT STALKER
$1,399.99 – $1,499.99Price range: $1,399.99 through $1,499.99
Remington 700 LONG Action Right Hand Inlet
- Integral multi-use bipod/tripod and EFR mounts ARE NOT included
- 1.25” through-hole for up to an M24 barrel contour
- 2.8 to 3.1 lbs in standard configuration
- Fully adjustable LOP, Cheek and EFR mount
- Full wraparound structured shell – matte
- Molded-in texture and color camo
Manners Long Action NIGHT STALKER
The quickly deployable butt system adjusts from 11.25” to 14.5” with one push of a button, giving you a choice of 9 rock-solid positions. With a few quick turns of the button, you can lock the system to your desired setting.
The Night Stalker also features our MCS ½” pad which may be adjusted slightly right to left. A machined-in flush cup is standard on the left side. The MCS-NS is the perfect platform for a compact, easily stowed, bolt action rifle.
The MCS-NS features a unique EFR mounting rail system that is molded into the shell of the stock. This greatly increases the strength and allows us to keep the fore-end narrow while providing a 1.25” through-hole for up to an M24 barrel contour.
Each rail is equipped with a flush cup and is able to mount the optional EFR bridge in multiple locations front to back. The rail may also be rotated 180* for more adjustability. Set-screws are included to install in the rails while in the field to keep out dirt and debris when the optional bridge is not installed.
The addition of a full-length adjustable ambidextrous cheek sets the Night Stalker above the competition. The cheek system includes lightweight, compact, quickly adjustable riser hardware with a traditional back post equipped with an e-clip to set the height. To quickly remove and install the cheek on the stock, the NS incorporates a wedge locking system requiring a 5/32’ Allen wrench.
Comes standard with a 7.5” arca mount which is recessed into the stock just ahead of the magazine area.
The NS is also equipped with an MCS original zero-exposure bipod rail with a snag-free design. This is a dual compatibility rail with a machined-in flush cup. The rail works with both Harris and pic rail mounted bipods, with the rear of the rail actually molded into the stock. The molded-in design allows it to withstand any amount of recoil or load placed on the stock from the bipod
Optional EFR Bridge with machined-in top picatinny rail for night optics of your choice. Additionally included is a picatinny side rail that can be attached either right or left. Forward and backward adjustments are also possible.
Highlights:
- 2.8 to 3.1 lbs in standard configuration
- Fully adjustable LOP, Cheek and EFR mount
- Full wraparound structured shell
- Molded-in texture and color camo
- Integral multi-use bipod/tripod and EFR mounts ARE NOT INCLUDED
| Inlet | 700 Long Action Mini Chassis, 700 Long Action Micro Chassis |
|---|---|
| Color | Back in black, High Plains, Scorched Earth, Tommy Bahama, Gap, Everglades |
Related products
-
MANNERS LRH SHORT ACTION
$1,055.00 – $1,245.00Price range: $1,055.00 through $1,245.00Select options This product has multiple variants. The options may be chosen on the product pageMANNERS LRH SHORT ACTION The new MANNERS LRH SHORT ACTION stock was developed for the modern long range hunting enthusiast looking for the ultimate light weight adjustable hunting stock. This is the perfect platform to start that dream precision hunting build or for competitors to build that lightweight competition gun for the new long range …
-
Mini Arca Rail Mount
$6.99 – $34.99Price range: $6.99 through $34.99Select options This product has multiple variants. The options may be chosen on the product pageMade in the USA by hard working Americans!
- 1.50” arca rail Rifle Mount.
- Billet aluminum construction.
- Black, FDE, OD Green, bronze or tungsten cerakote available!
- Semi Rounded bottom to accommodate many stock designs
- Weight: .50 ounces.
- Compatible with Arca Swiss style tripod heads.
- Overall length: 1.50” OAL
- Bolt/Mount spacing .850 inches.
- 10-32 fasteners with tee nuts included for installation.
-
Manners EH1 Kelbly
$850.00Read moreManners Eh1 M5 long action rifle stock
- swamp camo finish
- RIGHT hand
- Inlet for KELBLY Atlas Tactical Long actions (remington 700 long actions & clones will fit, the ejection ports cutout may be slightly off, however footprint is the same)
- Barrel channel is inlet for Proof Sendero Contour
- Bottom metal inlet for M5 long action
3 flush cups installed, (1 Bottom Rear, 1 Left Front, 1 Left Rear)
Bipod Rail Included with mounting hardware.
Due to so many variances in rifles/barreled actions Some minor fitting may be required to fit this to your barreled action.
Email Newsletter
Best offers
100% Safe
Secure Shopping
Quick Customer Support
Tuesday-Friday











