Top rated products
-
X-caliber 22 caliber blank 1-8 twist 27'' sendero contour
$245.00
-
30 Nosler
$122.57
-
Tikka FLUTED bolt assembly
$469.00
-
Remington 700 & Christensen Bolts
$250.00 – $479.99
-
Hornady 22cal 55gr SP W/Cannelure #2266
$17.99
Tikka 20 MOA Picatinny Rail
$59.99
MOUNTAIN TACTICAL® is excited to offer our Gen 2 Performance Series Picatinny rails for the Tikka T3/T3x available in 20 MOA. The recoil lug is now machined into the rail as one integral system like our Gen 3 Elite Series Rails.
The primary advantage of the Performance Series picatinny rail system is our proprietary utilization of Tikka’s Opti-Lock recess in the action. This recoil lug absorbs the shearing forces of the mount under recoil instead of the four tiny screws included in most other mounting systems.
These rails are full, MIL-STD 1913 spec rails machined to an amazing +/- .0005″ tolerance. Machined from one piece of 6061 aluminum and MIL-STD Type 3 anodizing, these rails will give you a lifetime of service. Type 3 anodizing creates a hardened coating with a Rockwell Hardness value between 60 and 70.
Unlike standard Weaver style rail mounts with limited contact with the scope rings, our full picatinny rails make contact with the scope rings over the entire width of the mount. This eliminates potential damage that can occur under heavy recoil.
The MOUNTAIN TACTICAL® Performance Series rails for the Tikka T3/T3x are the finest aluminum Tikka T3 mounts you will find anywhere.
In stock
Tikka 20 MOA Picatinny Rail
The primary advantage of the Performance Series Picatinny rail system is our proprietary utilization of Tikka’s Opti-Lock recess in the action. This recoil lug absorbs the shearing forces of the mount under recoil instead of the four tiny screws included in most other mounting systems.
These are the original mounts introduced to the world that incorporated a recoil lug for the Tikka rifle system when MOUNTAIN TACTICAL® was founded.
These rails are full, MIL-STD 1913 spec rails machined to an amazing +/- .0005″ tolerance. Machined from one piece of 6061 aluminum and MIL-STD Type 3 anodizing, these rails will give you a lifetime of service. Type 3 anodizing creates a hardened coating with a Rockwell Hardness value between 60 and 70.
Unlike standard Weaver-style rail mounts with limited contact with the scope rings, our full Picatinny rails contact the scope rings over the entire width of the mount. This eliminates potential damage that can occur under heavy recoil.
The MOUNTAIN TACTICAL® Tikka 20 MOA Picatinny Rail is the finest Tikka optic mount you will find anywhere.
***Torque to 25 in/lbs***
Professional Gunsmith Installation Recommended!
Tikka Actions for sale – Bolts – Stocks – Pre fits – Barrels (jaoutdoors.com)
Home – MOUNTAIN TACTICAL® (tikkaperformance.com)
Related products
-
Sale!
Hawkins Tikka Hybrid Rings
$132.00Select optionsHawkins Tikka Hybrid Rings Tikka T3x Hawkins hybrid rings. Ultra-light sleek design. 25 MOA built in can’t. Bubble level included. Available in 30mm or 34mm low sizes. Return Policy: Buyer has 14 days from date of delivery to return item. All Returns are subject to a 20% restocking fee no exceptions, item must be in new unused/unopen …
-
T3x Magnum Long Action
$855.00Read moreTikka T3x lite magnum long action
- .540 magnum bolt face (works for calibers like 264 win mag, 7 rem mag, 300 win mag, 338 win mag, etc.)
- Chromoly blued steel
- Factory fluted bolt
- Factory oversized bolt knob
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3X S.S. MAGNUM long action
$899.99Read moreTikka T3x lite long action magnum bolt face
- .540 magnum bolt face (works for calibers like 270 wsm, 7 wsm, 300 wsm, 6.5 saum, 7 saum, 300 saum, 6.5 PRC, 264 win mag, 270 weatherby, 300 weatherby, 340 weatherby, 300 PRC, 300 win mag, 7 mag, RUM family)
- Stainless steel
- Factory Cerakote VEIL alpine
- Factory fluted bolt
- Factory oversized bolt knob
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3x LONG action 30-06
$655.00Add to cartTikka T3x lite LONG action
- .473 bolt face (works for calibers like 25-06,270win,280rem,30-06)
- Chromoly blued steel
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued and UNCOATED stainless steel actions, these will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
