Top rated products
-
X-caliber 22 caliber blank 1-8 twist 27'' sendero contour
$245.00
-
T3x S.S. Short Action 308
$820.00
-
Tikka Factory Magazines
$39.99 – $49.99
-
Remington 700 & Christensen Stripped Actions
$159.99 – $315.00
-
375 Rem Ultra Mag
$104.99
T3X 6.5 PRC/SAUM action
$775.00
Tikka T3x lite 6.5 PRC/SAUM magnum bolt face
- .540 magnum bolt face (works for calibers like 270 wsm, 7 wsm, 300 wsm, 6.5 saum, 7 saum, 300 saum, 6.5 PRC)
- Chromoly steel blued finish
- Factory fluted bolt
- Factory oversized bolt knob
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.075)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
Out of stock
T3X 6.5 PRC/SAUM action
Tikka T3x lite 6.5 PRC/SAUM magnum bolt face
- .540 magnum bolt face (works for calibers like 270 wsm, 7 wsm, 300 wsm, 6.5 saum, 7 saum, 300 saum, 6.5 PRC)
- Chromoly steel blued finish
- Factory fluted bolt
- Factory oversized bolt knob
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.075)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
J&A Outdoors – Firearm Solutions – Shooting Products (jaoutdoors.com)
Tikka – Rifles, hunting rifles, tactical rifles, scopes, optics
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
***MUST SHIP TO FFL***
- J&A Outdoors LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without a valid FFL.
- It is the buyer’s responsibility to check and comply with local, state, and federal laws. The buyer assumes all legality, liability and responsibility for the condition, use & security/storage of the firearm/receiver purchased.
- It is the buyer’s responsibility to contact the FFL dealer. Be aware that it is customary for your local dealer to charge a transaction fee at the time you pick up your purchase. This transfer fee is strictly between you and your local dealer. It is your responsibility to check with your local dealer concerning any policy of this kind and concerning your obligations.
- You the buyer are responsible for forwarding a copy of the FFL and all pertinent contact information to J&A outdoors LLC. FFL’s can be sent to:
support@JAOUTDOORS.com
| Weight | 48 oz |
|---|---|
| Dimensions | 7 × 5 × 4 in |
Related products
-
Sale!
Hawkins 30mm Low Scope Rings
$167.00Add to cartFitment:
Main Tube diameter: 30MM
Ring height: LOW .885 (see image for height measurements)
DESCRIPTION
Ultra-light tactical scope rings from Hawkins Precision are made in America out of a single billet of 6061 T6 aluminum. These fully machined rings feature a rigid, corrosion-resistant, black anodized finish. Machined with a clamp made from 7075 aluminum, these scope rings deliver extra strength and grip where it counts. And the ultra-light design frees you from carrying unnecessary bulk. Hawkins Precision scope rings come standard with an anti-cant level cap and are available in 30mm and 34mm, sized in low, medium, and high.
Size Measurement from Picatinny Rail
to optical center30mm Application Low .885″ * 50mm objective with standard barrel contours Torque Specifications
Check the torque recommendations for your rifle scope before using these recommendations.
*Ring top screws: 25-in-lb.
*Base cross bolts: 65-in-lb. -
Sale!
CTR short action 308
$844.99Read moreTikka CTR short action
- 308 bolt face (22-250,243,6.5 creedmoor, etc)
- Chromoly blued steel
- Factory BLACK
- Factory oversized bolt knob
- short action bolt stop
- detachable 10 round steel magazine (internal magazine length of 2.965)
- OEM ALUMINUM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 14 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
Tikka T3X CTR Trigger Right Hand
$135.00Add to cartProduct Description
•••••Description: Tikka T3 / T3X Complete Trigger, Right Handed. This stainless steel complete trigger assembly is designed to fit ALL Tikka T3 and T3x model rifles. The assembly comes ready to drop in your gun, and includes a complete RH trigger mechanism, and right hand safety lever.
- Complete and ready to drop in your gun
- Fits Tikka model T3 and T3x RH rifles
Includes:
- Complete RH STD Trigger Mechanism
- Right Hand Safety Lever
Manufacturer: Tikka
PRODUCT SPECIFICATIONS:
- Brand: Tikka
- Caliber: .17 Rem,.204 Ruger,.222 Remington,.223 Rem,5.56x45mm,.22-250 Rem,.243 Win,.260 Rem,7mm-08 Rem,.308 Win,7.62x51mm,.25-06 Rem,6.5x55mm,.270 Win,7×64 Brenneke,.30-06 Springfield,8x57mm IS,9.3x62mm,7mm Rem Mag,.300 Win Mag,.338 Win Mag,.270 WSM,.300 WSM
- Finish / Color: Stainless Steel
- Firearm Type: Rifle
- Material: Steel
- Models Fit: Tikka T3,Tikka T3x
-
T3x WSM short action
$775.00Read moreTikka T3x lite WSM short action
- .540 magnum bolt face (works for calibers like 270 wsm, 7 wsm, 300 wsm, 6.5 saum, 7 saum, 300 saum, 6.5 PRC)
- Chromoly blued steel
- Factory fluted bolt
- Factory oversized bolt knob
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
