Top rated products
-
X-caliber 22 caliber blank 1-8 twist 27'' sendero contour
$245.00
-
30 Nosler
$122.57
-
Tikka FLUTED bolt assembly
$469.00
-
Remington 700 & Christensen Bolts
$250.00 – $479.99
-
Hornady 22cal 55gr SP W/Cannelure #2266
$17.99
T3x short action 308
$855.00
Tikka T3x lite short action
- 308 bolt face (22-250,243,6.5 creedmoor, etc)
- Chromoly blued steel
- Factory fluted bolt
- Factory oversized bolt knob
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
Out of stock
Tikka T3x lite short action 308
- 308 bolt face (22-250,243,6.5 creedmoor, etc)
- Chromoly blued steel
- Factory fluted bolt
- Factory oversized bolt knob
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
***MUST SHIP TO FFL***
- J&A Outdoors LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without a valid FFL.
- It is the buyer’s responsibility to check and comply with local, state, and federal laws. The buyer assumes all legality, liability and responsibility for the condition, use & security/storage of the firearm/receiver purchased.
- It is the buyer’s responsibility to contact the FFL dealer. Be aware that it is customary for your local dealer to charge a transaction fee at the time you pick up your purchase. This transfer fee is strictly between you and your local dealer. It is your responsibility to check with your local dealer concerning any policy of this kind and concerning your obligations.
- You the buyer are responsible for forwarding a copy of the FFL and all pertinent contact information to J&A outdoors LLC. FFL’s can be sent to:
support@JAOUTDOORS.com
| Weight | 48 oz |
|---|---|
| Dimensions | 7 × 5 × 4 in |
Related products
-
T3X WSM action
$655.00Read moreTikka T3x lite WSM short action
- .540 bolt face (works for calibers like 7 wsm, 300 wsm, 325 wsm, 6.5 saum, 7 saum, 6.5 PRC)
- Chromoly blued steel
- SHORT action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM polymer trigger guard
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3X S.S. MAGNUM Long Action
$730.00Read moreTikka T3x lite long action magnum bolt face
- .540 magnum bolt face (works for calibers like 264 win mag, 270 weatherby, 300 weatherby, 340 weatherby, 300 PRC, 300 win mag, 7 mag, RUM family)
- Stainless steel
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued & Uncoated Stainless-steel actions – these will come with no imperfections on the finish. Also, In some cases there will be tooling marks on the inside of the receiver face/threads where tikka/Sako reams the bolt raceways with their tooling. This is cosmetic only – it does not affect function whatsoever.
-
T3x S.S. Short Action 308
$899.99Read moreTikka T3x lite short action
- .473 bolt face (works for calibers like 22-250,243,260,308)
- Stainless steel
- Factory Cerakote VEIL alpine
- Factory fluted bolt
- Factory oversized bolt knob
- Short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM Polymer trigger guard
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3x LONG action 30-06
$655.00Add to cartTikka T3x lite LONG action
- .473 bolt face (works for calibers like 25-06,270win,280rem,30-06)
- Chromoly blued steel
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued and UNCOATED stainless steel actions, these will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
