Category
- ADG BRASS Reloading components
- AG Composites
- Atlas bipods & accessories
- Berger Bullets
- Christensen Arms Actions & Accessories
- Custom barrel Blanks
- Custom Rifles
- Defiance Actions
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Mesa Precision Arms
- Muzzle Brakes
- Norma Brass
- Proof Research
- Redding dies
- Remington Actions & Accessories
- Savage actions & accessories
- SRS Rails
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- TriggerTech Triggers
- Vortex Optics
- XLR Industries
Products
- ADG BRASS Reloading components
- AG Composites
- Atlas bipods & accessories
- Berger Bullets
- Christensen Arms Actions & Accessories
- Custom barrel Blanks
- Custom Rifles
- Defiance Actions
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Mesa Precision Arms
- Muzzle Brakes
- Norma Brass
- Proof Research
- Redding dies
- Remington Actions & Accessories
- Savage actions & accessories
- SRS Rails
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- TriggerTech Triggers
- Vortex Optics
- XLR Industries
Top rated products
-
T3x WSM short action $775.00
-
Hawkins 30mm Low Scope Rings
$185.00$167.00 -
SRS 4.25 Bipod Rail
$45.00$37.99 -
6.5 Creedmoor $70.00
-
Savage Large Shank Nut & Lug
$35.00$29.99
Tag: rifle
rifle
Showing 1–32 of 42 results
-
Savage 110 short action 308
$369.99 – $399.99Select options***MUST SHIP TO FFL*** J&A Outdoors LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without a valid FFL. It is the buyer’s responsibility to check and comply with local, state, and federal laws. The buyer …
-
Savage 110 SA 223
$375.00$359.99Read moreSavage Model 110
Matte black finish
Right Hand
Short Action
SMALL Shank
223 Bolt Face
Works for calibers like 204 ruger, 222 remington, 223 remington – etc.
4.40 Action Screw Space
Bottom Bolt Release
AccuTrigger
Knurled bolt knob
Important to note– there may be handling marks from barrel removal, these actions come brand new unfired – however, please note in some instances (not always) there will be minor handling marks from disassembly.
-
Savage 110 SA Magnum
$375.00Read moreSavage Model 110
Matte black finish
Right Hand
Short Action
LARGE Shank
.540 Magnum Bolt Face
Works for calibers like 6.5 PRC, 270 WSM, 7 WSM, 300 WSM, 325 WSM, 7 SAUM, 300 SAUM, etc.
4.40 Action Screw Space
Bottom Bolt Release
AccuTrigger
Knurled bolt knob
Important to note– there may be handling marks from barrel removal, these actions come brand new unfired – however, please note in some instances (not always) there will be minor handling marks from disassembly.
-
Savage 110 Long action
$369.99 – $419.99Select options***MUST SHIP TO FFL*** J&A Outdoors LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without a valid FFL. It is the buyer’s responsibility to check and comply with local, state, and federal laws. The buyer …
-
Savage 110 MAGNUM LA
$375.00Read moreSavage Model 110
Matte black finish
Right Hand
LONG Action
SMALL Shank
.540 MAGNUM Bolt Face
Works for calibers like 7mm rem mag, 300 win mag, 338 win mag etc.
Bottom Bolt Release
AccuTrigger
Knurled bolt knob
Important to note– These actions come from the factory with picatinny rails installed, we remove them before selling – in some cases there will be minor blemishes from the picatinny rail (this is purely cosmetic that does not affect functionality whatsoever.) There may be handling marks from barrel removal, these actions come brand new unfired – however, please note in some instances (not always) there may be minor handling marks from disassembly.
-
Savage Axis Stripped Actions
$9.99 – $60.00Select optionsSavage Axis Stripped Actions Savage Axis Stripped Actions are available in 3 finishes: Chromoly Blued finish Stainless Steel Cerakote Grey Stainless Steel Right and Left Hand NO TRIGGER OR BOLT Savage axis actions are all one length, these can be short OR long action by simply rotating the lug on the …
-
Savage Tactical Bolt Handle
$39.99Add to cartBrand New OEM knob!
Tactical, knurled.
Right hand
Bolt handle.
Matte black.
Measurements:
3.75″ Center of Bolt to End of Knob
0.87 Knob Diameter
WEIGHT: 5.4-5.6oz
NEW – BULK PACKAGED
Fits Savage models 10, 11, 12, 110, 111, 112 etc.
This WILL NOT WORK ON AXIS models!!!!!!
-
Tikka Stocks
$74.99 – $259.99Select optionsTikka Stocks Factory Tikka Stocks in a variety of fit & finishes! CTR Veil Alpine & Wideland Tikka CTR Wood stocks Roughtech brown & black web, Black & grey web. Return Policy: Buyer has 14 days from date of delivery to return item. All Returns are subject to a 20% …
-
Tikka T3 / T3X Trigger, Right Handed
$135.00$79.99Add to cartProduct Description
•••••Description: Tikka T3 / T3X Complete Trigger, Right Handed. This stainless steel complete trigger assembly is designed to fit ALL Tikka T3 and T3x model rifles. The assembly comes ready to drop in your gun, and includes a complete RH trigger mechanism, and right hand safety lever.
- Complete and ready to drop in your gun
- Fits Tikka model T3 and T3x RH rifles
Includes:
- Complete RH STD Trigger Mechanism
- Right Hand Safety Lever
Manufacturer: Tikka
PRODUCT SPECIFICATIONS:
- Brand: Tikka
- Caliber: .17 Rem,.204 Ruger,.222 Remington,.223 Rem,5.56x45mm,.22-250 Rem,.243 Win,.260 Rem,7mm-08 Rem,.308 Win,7.62x51mm,.25-06 Rem,6.5x55mm,.270 Win,7×64 Brenneke,.30-06 Springfield,8x57mm IS,9.3x62mm,7mm Rem Mag,.300 Win Mag,.338 Win Mag,.270 WSM,.300 WSM
- Finish / Color: Stainless Steel
- Firearm Type: Rifle
- Material: Steel
- Models Fit: Tikka T3,Tikka T3x
-
Tikka bolt assembly
$389.99Select optionsDescription: Tikka T3 / T3X Right Handed Bolt Assembly. This assembly includes the bolt body, bolt shroud, firing pin, firing pin spring, and extractor assembly. This bolt assembly fits Right Handed Tikka T3 and T3X rifles. This is a factory original Tikka part made in Finland. Made to the highest standards, this is the …
-
Tikka FLUTED bolt assembly
$469.00Select optionsDescription: Tikka T3 / T3X Right Handed Bolt Assembly. This assembly includes the bolt body, bolt shroud, firing pin, firing pin spring, and extractor assembly. This bolt assembly fits Right Handed Tikka T3 and T3X rifles. This is a factory original Tikka part made in Finland. Made to the highest standards, this is the …
-
CTR S.S. short action 308
$899.99Read moreTikka S.S. CTR short action
- 308 bolt face (22-250,243,6.5 creedmoor, etc)
- Stainless steel
- Factory oversized bolt knob
- short action bolt stop
- OEM detachable 10 round steel magazine (internal magazine length of 2.965)
- OEM ALUMINUM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 14 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued and UNCOATED stainless steel actions, these will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
CTR short action 308
$850.00$844.99Add to cartTikka CTR short action
- 308 bolt face (22-250,243,6.5 creedmoor, etc)
- Chromoly blued steel
- Factory BLACK
- Factory oversized bolt knob
- short action bolt stop
- detachable 10 round steel magazine (internal magazine length of 2.965)
- OEM ALUMINUM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 14 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
Fat bastard 30 cal 5/8-24
$215.00$185.00Add to cart30 caliber
5/8-24 thread pitch
stainless steel
1.10″ in Diameter
3.5″ In Length
Weighs 7.2 oz
Made for a barrel diameters of .850 or larger.
Description
American Precision Arms is very excited to share the release of the Generation 3 Fat Bastard. It has been a long time coming but we wanted to make sure everything was perfect before offering something new.
The development of APA Gen 3 Fat Bastard was the result of American Precision Arms’ constant pursuit of breaking the mold and a desire to meet the demands of the Long-Range and Hunting markets. APA has combined the standards of high-level performance and reliability with distinctive design enhancements to improve both accuracy and performance. These enhancements benefit the shooter experience at the range and in the field where every advantage matters.
The roots of the new Generation 3 version of the Fat Bastard lie in the requests of the elite long-range precision rifle community. APA’s goal was to meet the needs of those shooters while also maintaining their standards of pristine manufacturing. Among the design, changes are three key features. The advanced Unique Recoil Profile tunable top port design allows the shooter to fine-tune the muzzle movement for absolute target retention. In addition to that, the new lock nut design creates a zero overrotating platform. Last, is the addition of a fifth Bastard port section that eliminates even more recoil than before.
NOT JUST STOPING RECOIL, BUT LATERAL MOVEMENT AND MUZZLE RISE AS WELL, FOR A TRULY NEUTRAL SIGHT PICTURE.
URP (Unique Recoil Profile) Top Ports
This allows the shooter to not only combat direct recoil but muzzle rise and lateral movement based on the characteristics of their rifle, personal grip, stance and the position they are shooting from.We developed the U.R.P. Adjustable Gas System. These aren’t just randomly placed top ports. Every port is placed adjacent to the internal Bastard tooth where there is maximum pressure build-up. This makes the adjustable ports directionally effective.
The unique tunable gas system combined with the trademark APA ports work together to achieve a sight picture that moves less than ever before. There are 10 directional gas ports that can be tuned to counteract you’re U.R.P. (unique recoil profile).
There are endless combinations to keep your sights on target. To calibrate the brake to your U.R.P., start testing with all the gas screws installed. Pay attention to the movement of your reticle, and begin removing the gas screws as the recoil requires.
When the gas screws are removed on the right side, the rifle will be shifted left. For the opposite effect simply remove the screws on the left. The gas holes closer to the nut have a more dramatic effect and the ports closer to the brake crown have a lesser effect. When you find your U.R.P. combination, Threadtite your screws into place.
Additional Row of Bastard Ports• For Added Recoil ReductionNew Lock-Nut Design• Perfect Muzzle Placement• No Carbon Ring• No Over Rotation• Stronger Lock UpThe Gen 3 Fat Bastard can handle magnum cartridges.
Each brake includes set screws, one Allen wrench, and a single-use Threadtite.
-
Fat bastard 30 cal 5/8-24
$215.00$185.00Add to cart30 caliber
5/8-24 thread pitch
nitride black finish
1.10″ in Diameter
3.5″ In Length
Weighs 7.2 oz
Made for a barrel diameters of .850 or larger.
Description
American Precision Arms is very excited to share the release of the Generation 3 Fat Bastard. It has been a long time coming but we wanted to make sure everything was perfect before offering something new.
The development of APA Gen 3 Fat Bastard was the result of American Precision Arms’ constant pursuit of breaking the mold and a desire to meet the demands of the Long-Range and Hunting markets. APA has combined the standards of high-level performance and reliability with distinctive design enhancements to improve both accuracy and performance. These enhancements benefit the shooter experience at the range and in the field where every advantage matters.
The roots of the new Generation 3 version of the Fat Bastard lie in the requests of the elite long-range precision rifle community. APA’s goal was to meet the needs of those shooters while also maintaining their standards of pristine manufacturing. Among the design, changes are three key features. The advanced Unique Recoil Profile tunable top port design allows the shooter to fine-tune the muzzle movement for absolute target retention. In addition to that, the new lock nut design creates a zero overrotating platform. Last, is the addition of a fifth Bastard port section that eliminates even more recoil than before.
NOT JUST STOPING RECOIL, BUT LATERAL MOVEMENT AND MUZZLE RISE AS WELL, FOR A TRULY NEUTRAL SIGHT PICTURE.
URP (Unique Recoil Profile) Top Ports
This allows the shooter to not only combat direct recoil but muzzle rise and lateral movement based on the characteristics of their rifle, personal grip, stance and the position they are shooting from.We developed the U.R.P. Adjustable Gas System. These aren’t just randomly placed top ports. Every port is placed adjacent to the internal Bastard tooth where there is maximum pressure build-up. This makes the adjustable ports directionally effective.
The unique tunable gas system combined with the trademark APA ports work together to achieve a sight picture that moves less than ever before. There are 10 directional gas ports that can be tuned to counteract you’re U.R.P. (unique recoil profile).
There are endless combinations to keep your sights on target. To calibrate the brake to your U.R.P., start testing with all the gas screws installed. Pay attention to the movement of your reticle, and begin removing the gas screws as the recoil requires.
When the gas screws are removed on the right side, the rifle will be shifted left. For the opposite effect simply remove the screws on the left. The gas holes closer to the nut have a more dramatic effect and the ports closer to the brake crown have a lesser effect. When you find your U.R.P. combination, Threadtite your screws into place.
Additional Row of Bastard Ports• For Added Recoil ReductionNew Lock-Nut Design• Perfect Muzzle Placement• No Carbon Ring• No Over Rotation• Stronger Lock UpThe Gen 3 Fat Bastard can handle magnum cartridges.
Each brake includes set screws, one Allen wrench, and a single-use Threadtite.
-
Fat bastard 338 cal 5/8-24
$215.00$185.00Read more338 caliber
5/8-24 thread pitch
nitride black finish
1.10″ in Diameter
3.5″ In Length
Weighs 7.2 oz
Made for a barrel diameters of .850 or larger.
Description
American Precision Arms is very excited to share the release of the Generation 3 Fat Bastard. It has been a long time coming but we wanted to make sure everything was perfect before offering something new.
The development of APA Gen 3 Fat Bastard was the result of American Precision Arms’ constant pursuit of breaking the mold and a desire to meet the demands of the Long-Range and Hunting markets. APA has combined the standards of high-level performance and reliability with distinctive design enhancements to improve both accuracy and performance. These enhancements benefit the shooter experience at the range and in the field where every advantage matters.
The roots of the new Generation 3 version of the Fat Bastard lie in the requests of the elite long-range precision rifle community. APA’s goal was to meet the needs of those shooters while also maintaining their standards of pristine manufacturing. Among the design, changes are three key features. The advanced Unique Recoil Profile tunable top port design allows the shooter to fine-tune the muzzle movement for absolute target retention. In addition to that, the new lock nut design creates a zero overrotating platform. Last, is the addition of a fifth Bastard port section that eliminates even more recoil than before.
NOT JUST STOPING RECOIL, BUT LATERAL MOVEMENT AND MUZZLE RISE AS WELL, FOR A TRULY NEUTRAL SIGHT PICTURE.
URP (Unique Recoil Profile) Top Ports
This allows the shooter to not only combat direct recoil but muzzle rise and lateral movement based on the characteristics of their rifle, personal grip, stance and the position they are shooting from.We developed the U.R.P. Adjustable Gas System. These aren’t just randomly placed top ports. Every port is placed adjacent to the internal Bastard tooth where there is maximum pressure build-up. This makes the adjustable ports directionally effective.
The unique tunable gas system combined with the trademark APA ports work together to achieve a sight picture that moves less than ever before. There are 10 directional gas ports that can be tuned to counteract you’re U.R.P. (unique recoil profile).
There are endless combinations to keep your sights on target. To calibrate the brake to your U.R.P., start testing with all the gas screws installed. Pay attention to the movement of your reticle, and begin removing the gas screws as the recoil requires.
When the gas screws are removed on the right side, the rifle will be shifted left. For the opposite effect simply remove the screws on the left. The gas holes closer to the nut have a more dramatic effect and the ports closer to the brake crown have a lesser effect. When you find your U.R.P. combination, Threadtite your screws into place.
Additional Row of Bastard Ports• For Added Recoil ReductionNew Lock-Nut Design• Perfect Muzzle Placement• No Carbon Ring• No Over Rotation• Stronger Lock UpThe Gen 3 Fat Bastard can handle magnum cartridges.
Each brake includes set screws, one Allen wrench, and a single-use Threadtite.
-
Little bastard 30 cal 1/2-28
$190.00$179.99Read more30 caliber
1/2-28 muzzle threads
- 1″ in Diameter,
- 2.55″ In Length
- Weighs 4.4 oz
- Made for a barrel diameters of .750 to 1 inch.
The Gen 3 Little Bastard can handle magnum cartridges.
This brake includes set screws, one Allen wrench, and a single-use Threadtite.
Description:
American Precision Arms is very excited to share the release of the Generation 3 Little Bastard. It has been a long time coming but we wanted to make sure everything was perfect before offering something new.
The development of APA Gen 3 Little Bastard was the result of American Precision Arms’ constant pursuit of breaking the mold and a desire to meet the demands of the Long-Range and Hunting markets. APA has combined the standards of high-level performance and reliability with distinctive design enhancements to improve both accuracy and performance. These enhancements benefit the shooter experience at the range and in the field where every advantage matters.
The roots of the new Generation 3 version of the Little Bastard lie in the requests of the elite long-range precision rifle community. APA’s goal was to meet the needs of those shooters while also maintaining their standards of pristine manufacturing. Among the design, changes are three key features. The advanced Unique Recoil Profile tunable top port design allows the shooter to fine-tune the muzzle movement for absolute target retention. In addition to that, the new lock nut design creates a zero over rotating platform. Last is the addition of a fourth Bastard port section that eliminates even more recoil than before.
NOT JUST STOPING RECOIL, BUT LATERAL MOVEMENT AND MUZZLE RISE AS WELL, FOR A TRULY NEUTRAL SIGHT PICTURE.
URP (Unique Recoil Profile) Top Ports
This allows the shooter to not only combat direct recoil but muzzle rise and lateral movement based on the characteristics of their rifle, personal grip, stance and the position they are shooting from.We developed the U.R.P. Adjustable Gas System. These aren’t just randomly placed top ports. Every port is placed adjacent to the internal Bastard tooth where there is maximum pressure build-up. This makes the adjustable ports directionally effective.
The unique tunable gas system combined with the trademark APA ports work together to achieve a sight picture that moves less than ever before. There are 8 directional gas ports that can be tuned to counteract you’re U.R.P. (unique recoil profile).
There are 256 combinations to keep your sights on target. To calibrate the brake to your U.R.P., start testing with all the gas screws installed. Pay attention to the movement of your reticle, and begin removing the gas screws as the recoil requires.
When the gas screws are removed on the right side, the rifle will be shifted left. For the opposite effect simply remove the screws on the left. The gas holes closer to the nut have a more dramatic effect and the ports closer to the brake crown have a lesser effect. When you find your U.R.P. combination, Threadtite your screws into place.
Additional Row of Bastard Ports• For Added Recoil ReductionNew Lock-Nut Design• Perfect Muzzle Placement• No Carbon Ring• No Over Rotation• Stronger Lock Up -
Little bastard 30 cal 5/8-24
$190.00$165.00Add to cart30 caliber
5/8-24 muzzle threads
- 1″ in Diameter,
- 2.55″ In Length
- Weighs 4.4 oz
- Made for a barrel diameters of .750 to 1 inch.
The Gen 3 Little Bastard can handle magnum cartridges.
This brake includes set screws, one Allen wrench, and a single-use Threadtite.
Description:
American Precision Arms is very excited to share the release of the Generation 3 Little Bastard. It has been a long time coming but we wanted to make sure everything was perfect before offering something new.
The development of APA Gen 3 Little Bastard was the result of American Precision Arms’ constant pursuit of breaking the mold and a desire to meet the demands of the Long-Range and Hunting markets. APA has combined the standards of high-level performance and reliability with distinctive design enhancements to improve both accuracy and performance. These enhancements benefit the shooter experience at the range and in the field where every advantage matters.
The roots of the new Generation 3 version of the Little Bastard lie in the requests of the elite long-range precision rifle community. APA’s goal was to meet the needs of those shooters while also maintaining their standards of pristine manufacturing. Among the design, changes are three key features. The advanced Unique Recoil Profile tunable top port design allows the shooter to fine-tune the muzzle movement for absolute target retention. In addition to that, the new lock nut design creates a zero over rotating platform. Last is the addition of a fourth Bastard port section that eliminates even more recoil than before.
NOT JUST STOPING RECOIL, BUT LATERAL MOVEMENT AND MUZZLE RISE AS WELL, FOR A TRULY NEUTRAL SIGHT PICTURE.
URP (Unique Recoil Profile) Top Ports
This allows the shooter to not only combat direct recoil but muzzle rise and lateral movement based on the characteristics of their rifle, personal grip, stance and the position they are shooting from.We developed the U.R.P. Adjustable Gas System. These aren’t just randomly placed top ports. Every port is placed adjacent to the internal Bastard tooth where there is maximum pressure build-up. This makes the adjustable ports directionally effective.
The unique tunable gas system combined with the trademark APA ports work together to achieve a sight picture that moves less than ever before. There are 8 directional gas ports that can be tuned to counteract you’re U.R.P. (unique recoil profile).
There are 256 combinations to keep your sights on target. To calibrate the brake to your U.R.P., start testing with all the gas screws installed. Pay attention to the movement of your reticle, and begin removing the gas screws as the recoil requires.
When the gas screws are removed on the right side, the rifle will be shifted left. For the opposite effect simply remove the screws on the left. The gas holes closer to the nut have a more dramatic effect and the ports closer to the brake crown have a lesser effect. When you find your U.R.P. combination, Threadtite your screws into place.
Additional Row of Bastard Ports• For Added Recoil ReductionNew Lock-Nut Design• Perfect Muzzle Placement• No Carbon Ring• No Over Rotation• Stronger Lock Up -
Little bastard 338 cal 5/8-24
$195.00$165.00Read more338 caliber
5/8-24 muzzle threads
- 1″ in Diameter,
- 2.55″ In Length
- Weighs 4.4 oz
- Made for a barrel diameters of .750 to 1 inch.
The Gen 3 Little Bastard can handle magnum cartridges.
This brake includes set screws, one Allen wrench, and a single-use Threadtite.
Description:
American Precision Arms is very excited to share the release of the Generation 3 Little Bastard. It has been a long time coming but we wanted to make sure everything was perfect before offering something new.
The development of APA Gen 3 Little Bastard was the result of American Precision Arms’ constant pursuit of breaking the mold and a desire to meet the demands of the Long-Range and Hunting markets. APA has combined the standards of high-level performance and reliability with distinctive design enhancements to improve both accuracy and performance. These enhancements benefit the shooter experience at the range and in the field where every advantage matters.
The roots of the new Generation 3 version of the Little Bastard lie in the requests of the elite long-range precision rifle community. APA’s goal was to meet the needs of those shooters while also maintaining their standards of pristine manufacturing. Among the design, changes are three key features. The advanced Unique Recoil Profile tunable top port design allows the shooter to fine-tune the muzzle movement for absolute target retention. In addition to that, the new lock nut design creates a zero over rotating platform. Last is the addition of a fourth Bastard port section that eliminates even more recoil than before.
NOT JUST STOPING RECOIL, BUT LATERAL MOVEMENT AND MUZZLE RISE AS WELL, FOR A TRULY NEUTRAL SIGHT PICTURE.
URP (Unique Recoil Profile) Top Ports
This allows the shooter to not only combat direct recoil but muzzle rise and lateral movement based on the characteristics of their rifle, personal grip, stance and the position they are shooting from.We developed the U.R.P. Adjustable Gas System. These aren’t just randomly placed top ports. Every port is placed adjacent to the internal Bastard tooth where there is maximum pressure build-up. This makes the adjustable ports directionally effective.
The unique tunable gas system combined with the trademark APA ports work together to achieve a sight picture that moves less than ever before. There are 8 directional gas ports that can be tuned to counteract you’re U.R.P. (unique recoil profile).
There are 256 combinations to keep your sights on target. To calibrate the brake to your U.R.P., start testing with all the gas screws installed. Pay attention to the movement of your reticle, and begin removing the gas screws as the recoil requires.
When the gas screws are removed on the right side, the rifle will be shifted left. For the opposite effect simply remove the screws on the left. The gas holes closer to the nut have a more dramatic effect and the ports closer to the brake crown have a lesser effect. When you find your U.R.P. combination, Threadtite your screws into place.
Additional Row of Bastard Ports• For Added Recoil ReductionNew Lock-Nut Design• Perfect Muzzle Placement• No Carbon Ring• No Over Rotation• Stronger Lock Up -
Little bastard SS 30 cal 5/8-24
$195.00$165.00Read more30 caliber
5/8-24 muzzle threads
stainless steel
- 1″ in Diameter,
- 2.55″ In Length
- Weighs 4.4 oz
- Made for a barrel diameters of .750 to 1 inch.
The Gen 3 Little Bastard can handle magnum cartridges.
This brake includes set screws, one Allen wrench, and a single-use Threadtite.
Description:
American Precision Arms is very excited to share the release of the Generation 3 Little Bastard. It has been a long time coming but we wanted to make sure everything was perfect before offering something new.
The development of APA Gen 3 Little Bastard was the result of American Precision Arms’ constant pursuit of breaking the mold and a desire to meet the demands of the Long-Range and Hunting markets. APA has combined the standards of high-level performance and reliability with distinctive design enhancements to improve both accuracy and performance. These enhancements benefit the shooter experience at the range and in the field where every advantage matters.
The roots of the new Generation 3 version of the Little Bastard lie in the requests of the elite long-range precision rifle community. APA’s goal was to meet the needs of those shooters while also maintaining their standards of pristine manufacturing. Among the design, changes are three key features. The advanced Unique Recoil Profile tunable top port design allows the shooter to fine-tune the muzzle movement for absolute target retention. In addition to that, the new lock nut design creates a zero over rotating platform. Last is the addition of a fourth Bastard port section that eliminates even more recoil than before.
NOT JUST STOPING RECOIL, BUT LATERAL MOVEMENT AND MUZZLE RISE AS WELL, FOR A TRULY NEUTRAL SIGHT PICTURE.
URP (Unique Recoil Profile) Top Ports
This allows the shooter to not only combat direct recoil but muzzle rise and lateral movement based on the characteristics of their rifle, personal grip, stance and the position they are shooting from.We developed the U.R.P. Adjustable Gas System. These aren’t just randomly placed top ports. Every port is placed adjacent to the internal Bastard tooth where there is maximum pressure build-up. This makes the adjustable ports directionally effective.
The unique tunable gas system combined with the trademark APA ports work together to achieve a sight picture that moves less than ever before. There are 8 directional gas ports that can be tuned to counteract you’re U.R.P. (unique recoil profile).
There are 256 combinations to keep your sights on target. To calibrate the brake to your U.R.P., start testing with all the gas screws installed. Pay attention to the movement of your reticle, and begin removing the gas screws as the recoil requires.
When the gas screws are removed on the right side, the rifle will be shifted left. For the opposite effect simply remove the screws on the left. The gas holes closer to the nut have a more dramatic effect and the ports closer to the brake crown have a lesser effect. When you find your U.R.P. combination, Threadtite your screws into place.
Additional Row of Bastard Ports• For Added Recoil ReductionNew Lock-Nut Design• Perfect Muzzle Placement• No Carbon Ring• No Over Rotation• Stronger Lock Up -
T3x long action 30-06
$775.00Read moreTikka T3x lite long action
- .473 bolt face (25-06,270,280,30-06 etc)
- Chromoly blued steel
- Factory fluted bolt
- Factory oversized bolt knob
- long action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3x LONG action 30-06
$625.00Read moreTikka T3x lite LONG action
- .473 bolt face (works for calibers like 25-06,270win,280rem,30-06)
- Chromoly blued steel
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued and UNCOATED stainless steel actions, these will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3X S.S. long action 30-06
$675.00Read moreTikka T3x lite long action
- .473 bolt face (works for calibers like 25-06, 270 win, 280 rem, 280 ai, 30-06)
- Stainless steel
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued & Uncoated Stainless-steel actions – these will come with no imperfections on the finish. Also, In some cases there will be tooling marks on the inside of the receiver face/threads where tikka/Sako reams the bolt raceways with their tooling. This is cosmetic only – it does not affect function whatsoever.
-
T3X S.S. long action LEFT HAND 30-06
$699.99Read moreTikka T3x lite long action LEFT HAND
- .473 bolt face (works for calibers like 25-06, 270 win, 280 rem, 280 ai, 30-06)
- Stainless steel
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued and UNCOATED stainless steel actions these will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3X S.S. MAGNUM long action LEFT HAND
$699.99Add to cartTikka T3x lite long action LEFT HAND Magnum bolt face
-
- .540 magnum bolt face (works for calibers like 264 win mag, 270 weatherby, 300 weatherby, 340 weatherby, 300 PRC, 300 win mag, 7 mag, RUM family)
- Stainless steel
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued & Uncoated Stainless-steel actions – these will come with no imperfections on the finish. Also, In some cases there will be tooling marks on the inside of the receiver face/threads where tikka/Sako reams the bolt raceways with their tooling. This is cosmetic only – it does not affect function whatsoever.
-
-
T3x short action 308
$775.00Add to cartTikka T3x lite short action
- 308 bolt face (22-250,243,6.5 creedmoor, etc)
- Chromoly blued steel
- Factory fluted bolt
- Factory oversized bolt knob
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3X S.S. short action 308
$675.00Read moreTikka T3x lite short action
- .473 bolt face (works for calibers like 22-250,243,6.5 creedmoor,7mm-08, 308)
- Stainless steel
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued & Uncoated Stainless-steel actions – these will come with no imperfections on the finish. Also, In some cases there will be tooling marks on the inside of the receiver face/threads where tikka/Sako reams the bolt raceways with their tooling. This is cosmetic only – it does not affect function whatsoever.
-
T3x S.S. Short Action 308
$820.00Read moreTikka T3x lite short action
- .473 bolt face (works for calibers like 22-250,243,260,308)
- Stainless steel
- Factory Cerakote VEIL alpine
- Factory fluted bolt
- Factory oversized bolt knob
- Short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM Polymer trigger guard
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3x S.S. Short Action 308
$820.00Read moreTikka T3x lite short action
- .473 bolt face (works for calibers like 22-250,243,260,308)
- Stainless steel
- Factory Cerakote Veil Woodland (burnt bronze)
- Factory fluted bolt
- Factory oversized bolt knob
- Short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM Polymer trigger guard
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3X short action 308
$625.00Add to cartTikka T3x lite short action
- .473 bolt face (works for calibers like 22-250,243,6.5 creedmoor,7mm-08, 308)
- Chromoly blued steel
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.