Top rated products
-
X-caliber 22 caliber blank 1-8 twist 27'' sendero contour
$245.00
-
30 Nosler
$122.57
-
Tikka FLUTED bolt assembly
$469.00
-
Remington 700 & Christensen Bolts
$250.00 – $479.99
-
Hornady 22cal 55gr SP W/Cannelure #2266
$17.99
CTR short action 308
$925.00
Tikka CTR short action
- 308 bolt face (22-250,243,6.5 creedmoor, etc)
- Chromoly blued steel
- Factory BLACK
- Factory oversized bolt knob
- short action bolt stop
- detachable 10 round steel magazine (internal magazine length of 2.965)
- OEM ALUMINUM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 14 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
Out of stock
CTR short action 308
***MUST SHIP TO FFL***
- J&A Outdoors LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without a valid FFL.
- It is the buyer’s responsibility to check and comply with local, state, and federal laws. The buyer assumes all legality, liability and responsibility for the condition, use & security/storage of the firearm/receiver purchased.
- It is the buyer’s responsibility to contact the FFL dealer. Be aware that it is customary for your local dealer to charge a transaction fee at the time you pick up your purchase. This transfer fee is strictly between you and your local dealer. It is your responsibility to check with your local dealer concerning any policy of this kind and concerning your obligations.
- You the buyer are responsible for forwarding a copy of the FFL and all pertinent contact information to J&A outdoors LLC. FFL’s can be sent to:
support@JAOUTDOORS.com
| Weight | 48 oz |
|---|---|
| Dimensions | 7 × 5 × 4 in |
Related products
-
Sale!
Hawkins 30mm Low Scope Rings
$167.00Add to cartFitment:
Main Tube diameter: 30MM
Ring height: LOW .885 (see image for height measurements)
DESCRIPTION
Ultra-light tactical scope rings from Hawkins Precision are made in America out of a single billet of 6061 T6 aluminum. These fully machined rings feature a rigid, corrosion-resistant, black anodized finish. Machined with a clamp made from 7075 aluminum, these scope rings deliver extra strength and grip where it counts. And the ultra-light design frees you from carrying unnecessary bulk. Hawkins Precision scope rings come standard with an anti-cant level cap and are available in 30mm and 34mm, sized in low, medium, and high.
Size Measurement from Picatinny Rail
to optical center30mm Application Low .885″ * 50mm objective with standard barrel contours Torque Specifications
Check the torque recommendations for your rifle scope before using these recommendations.
*Ring top screws: 25-in-lb.
*Base cross bolts: 65-in-lb. -
T3X S.S. long action 30-06
$730.00Read moreTikka T3x lite long action
- .473 bolt face (works for calibers like 25-06, 270 win, 280 rem, 280 ai, 30-06)
- Stainless steel
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued & Uncoated Stainless-steel actions – these will come with no imperfections on the finish. Also, In some cases there will be tooling marks on the inside of the receiver face/threads where tikka/Sako reams the bolt raceways with their tooling. This is cosmetic only – it does not affect function whatsoever.
-
T3X Magnum Long action
$655.00Read moreTikka T3x lite long action
- .540 bolt face (works for calibers like 7 rem mag, 300 win mag, 338 win mag, etc.)
- Chromoly blued steel
- Long action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM polymer trigger guard
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3x LEFT HAND Short Action 308
$720.00Read moreTikka LEFT HAND T3x lite short action
- LEFT HAND
- .473 bolt face (works for calibers like 22-250,243,260,308)
- Chromoly blued steel
- Short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM Polymer trigger guard
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note:
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
