Category
- ACE Barrels
- ADG BRASS
- AG Composites
- Arca – Picatinny Rails
- Atlas bipods & accessories
- Bargain Cave
- Benchmark Barrels
- Berger Bullets
- Cerakote Services
- Christensen Arms Actions & Accessories
- Custom Barrel Blanks
- Custom Rifles
- Dead Air Silencers
- Defiance Actions
- Gun Screws
- Gunsmith Services
- H-S Precision
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Kinport Peak Rifles Barrel Services
- KRG
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Meraki Machine
- Mesa Precision Arms
- Mountain Tactical
- Muzzle Brakes
- Nightforce Optics
- Norma Brass
- Optics
- Proof Research
- Pure Precision
- Redding Reloading
- Remington Actions & Accessories
- Ruger
- Savage actions & accessories
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- TriggerTech Triggers
- Vortex Optics
- Western Precision Rifles
- XLR Industries
Products
- ACE Barrels
- ADG BRASS
- AG Composites
- Arca - Picatinny Rails
- Atlas bipods & accessories
- Bargain Cave
- Benchmark Barrels
- Berger Bullets
- Cerakote Services
- Christensen Arms Actions & Accessories
- Custom Barrel Blanks
- Custom Rifles
- Dead Air Silencers
- Defiance Actions
- Gun Screws
- Gunsmith Services
- H-S Precision
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Kinport Peak Rifles Barrel Services
- KRG
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Meraki Machine
- Mesa Precision Arms
- Mountain Tactical
- Muzzle Brakes
- Nightforce Optics
- Norma Brass
- Optics
- Proof Research
- Pure Precision
- Redding Reloading
- Remington Actions & Accessories
- Ruger
- Savage actions & accessories
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- TriggerTech Triggers
- Vortex Optics
- Western Precision Rifles
- XLR Industries
Top rated products
- Triggertech Primary Trigger $164.99
- TriggerTech Diamond Flat Straight $304.99
- TriggerTech Diamond Curved $304.99
- BT46-LW17 PSR Atlas Bipod $354.95
- BT47-LW17 PSR Atlas Bipod $374.95
Dominus-SR Suppressor
$1,610.00
Specifications
(1) 30 Caliber 5/8-24 SR Brake Included
Max caliber | .30 caliber, up to .300 RUM |
Material | Titanium |
Length | 6.95 inches |
Diameter | 1.85-inch OD (collar) 1.80-inch OD |
Mounts | SR series brake (full spec) |
Weight | 12.5 ounces |
Brake TPI’s | 1/2-28, 5/8-24, 9/16-24, 3/4-24, 3/4-28, M18x1.0, M18x1.5 |
Finish | Black CeraKote; OD Green or FDE available |
Brake Material | Heat-treated 17-4 stainless |
Brake Finish | Ionbond DLC |
Use | Hard-Use/Full-Auto & Precision/Long-range |
Out of stock
Dominus-SR Suppressor 30 Caliber
The TBAC Dominus-SR Suppressor is Thunder Beast’s high performance hard use full auto rated 30 caliber suppressor. It is constructed from high quality titanium making it a very lightweight option when compared to most other suppressors. This suppressor offers unmatched accuracy and retention. If you have used ultra-suppressor, the Dominus meters right in between an Ultra 7 and 9. The 6.95-inch DOMINUS-SR meters at 137 dB (milspec left/right) and 126 dB at shooters-ear1 on a 20-inch .308. These numbers are from a PULSE system. The SR quick detach mount offers a rugged retention system that will always stay locked in place and lockup the same after being taken off and put back on. There is no noticeable shift after taking the suppressor off. This suppressor is compatible with only the SR brake in either .30 cal or .338. The SR mount uses a novel paw and cam-path system to ensure that “full lock up” can happen in either of the two adjacent detent slots for any given final shouldering position of the suppressor on the conical brake shoulder. This categorically avoids the “off by one” problem that many “clicky” mounts have. The SR mount has the exact same accuracy, repeatability, and return-to-zero characteristics that all TBAC precision suppressors are known for.
Specifications
Max caliber | .30 caliber, up to .300 RUM |
Material | Titanium |
Length | 6.95 inches |
Diameter | 1.85-inch OD (collar) 1.80-inch OD |
Mounts | SR series brake (full spec) |
Weight | 12.5 ounces |
Brake TPI’s | 1/2-28, 5/8-24, 9/16-24, 3/4-24, 3/4-28, M18x1.0, M18x1.5 |
Finish | Black CeraKote; OD Green or FDE available |
Brake Material | Heat-treated 17-4 stainless |
Brake Finish | Ionbond DLC |
Use | Hard-Use/Full-Auto & Precision/Long-range |
SUPPRESSOR DURABILITY RATINGS
There is general confusion as to what firing schedules different suppressors on the market can actually withstand. There are “full auto”-rated suppressors that will fall apart after a few mags of full auto, and on the other hand, there are some “precision rifle suppressors” that will actually withstand a lot of abuse.
DOMINUS-SR CATEGORY: “HARD-USE/FULL-AUTO” [HU/FA]
Lifetime to exceed at least 10 SURGE cycles on a 10.5″ M4 / MK18.
One SOCOM/SURGE CYCLE comprises
Mag 1: 1 round/second
Mag 2: 2 rounds/second
Mag 3: 1 round/second
Mag 4: 3-5 round burst
Mag 5: 1 round/second
Mag 6: 2 rounds/second
Mag 7: 1 round/second
Mag 8: 1 continuous burst
Outlined in Section 3.6.1.i. in Solicitation H92222-17-R-0011
The basis for this is the SOCOM/SURGE specification, which is a common heavy firing schedule specified in many military solicitations. One SURGE cycle is 8 magazines fired in this pattern, with magazine changes happening as quickly as possible. After a full 8-magazine cycle, the suppressor and firearm is allowed to cool to ambient. This firing schedule significantly exceeds the worst-case application of assault rifles and baffle rifles. A milspec M4 needs service and inspection after each cycle to keep operating.
Most common 17-4 steel muzzle brakes will be eroded significantly or have critical surfaces destroyed after 2-4 SURGE cycles. How often has your firing schedule destroyed your muzzle brake? If the answer is never, you haven’t even exceeded half of what this suppressor can take.
Suppressors in this category will still have minimum barrel length ratings for most cartridges.
The SR muzzle brake will have a replacement schedule if fired “to the letter” of this schedule. It is recommended that the SR brake be replaced when visible deformation of the brake ports happens, or the suppressor simply won’t fit over the brake anymore.
APPLICATION NOTES
Minimum barrel lengths:
5.5″ | .300 Blackout (subsonic and full power) |
7.5″ | 6.8 SPC, 7.62×39 |
10.3″ | 223 Rem, 5.56, 6.5 Grendel |
12.5″ | .308 Win, .260 Rem, 6.5 Creedmoor |
18″ | 6.5 SAUM, 6.5 PRC, 7mm RM, 7mm WSM, .300 WIN MAG, .300 WSM |
20″ | 7mm RUM, .300 RUM |
22″ | .300 Norma Magnum, 28 Nosler, 7 STW, 26 Nosler |
___LEGAL INFO______
J&A Outdoors will only ship suppressors to Class III FFL holders. BATF regulation information for Suppressor ownership are as follows:
Be at least 21 years of age.
Be a U.S. citizen.
Have no felony convictions or domestic violence convictions.
Have no dishonorable discharge.
Not deemed mentally unstable by a competent authority.
The NFA rules/laws are posted through the BATF website. At this time, the following states ALLOW private ownership of suppressors: AL, AK, AR, AZ, CO, CT, FL, GA, IA, ID, IN, KS, KY, LA, ME, MD, MI, MN, MO, MS, MT, NC, NE, ND, NV, NH, NM, OH, OK, OR, PA, SC, SD, TN, TX, UT, VA, VT, WA, WV, WI, and WY. CA allows class 3 dealers and class two manufacturers to possess suppressors.
Thunder Beast Arms Corporation [TBAC] | Products | DOMINUS-SR
Configuration | Dominus SR 30 Caliber, 338 ULTRA SR |
---|
Related products
-
Thunder Beast Ultra 7 Gen2
$1,180.00Select options This product has multiple variants. The options may be chosen on the product pageThunder Beast Ultra 7 Gen2 The Thunderbeast Ultra 7 Gen2 suppressor superseded the last in late 2020. The new version is both quieter and lighter than what was previously available. The Ultra 7 is designed for applications where a compact form factor is needed. You can expect excellent suppression out of this can even though …
-
Cb Brake Adapter Thunder Beast Suppressors
$20.00 – $99.99Select options This product has multiple variants. The options may be chosen on the product pageInstallation Instructions:
- Install torque: 12 Foot Pounds (144 Inch Pounds)
- **Tool is engineered to fail if over torqued to prevent damage to muzzle threads**
- Red Loctite Recommended on muzzle threads before install (thoroughly clean threads of all oil & debris before installation.)
- Anti-seize HIGHLY recommended on the external threads and cone of the muzzle device.
Email Newsletter
Best offers
100% Safe
Secure Shopping
Quick Customer Support
Tuesday-Friday