Top rated products
-
Triggertech Primary Trigger
$174.99
-
TriggerTech Diamond Flat Straight
$334.99
-
TriggerTech Diamond Curved
$334.99
-
BT46-LW17 PSR Atlas Bipod
$354.95
-
BT47-LW17 PSR Atlas Bipod
$374.95
Category: ADG BRASS
ADG BRASS
J&A Outdoors Firearm Solutions offers ADG BRASS Reloading components. ADG brass is designed not only for outstanding consistency, but also for enhanced durability. We accomplished this by adding material to the case in specific areas to strengthen it. With the additional material, our brass is heavier than most other manufacturers brass and therefore will require lower charge weights to achieve the same pressures and velocities due to the reduced volume inside the brass.
We recommend using a reputable load data source and working up from their recommended minimum starting loads. Failure to reduce charge weights established using other manufacturers brass will likely result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels. It is imperative that you START LOW and work up to safe pressures. Failure to do so may result in a overpressure situation.
All ADG brass reloading components are sold in their standard finish showing annealing marks.
***ADG Brass is sold with 1 ammo box & 50 pieces of brass per box***
We currently offer brass in these calibers:
| 6.5 CREEDMOOR, 6.5 PRC, 6.5 SAUM, 6.5 SAUM, 7 SAUM, 7 REM MAG, 28 NOSLER, 308 WINCHESTER, 300 WIN MAG, 300 NORMA MAG, 300 PRC, 300 RUM, 30 NOSLER, 338 LAPUA, 338 RUM, 338 EDGE, 7 PRC. |
Rest assured – if you try this brass, you will not be disappointed! We have had great reviews from shooters around the nation using this brass. It delivers the consistency needed for long range shooting along with the robust features most people need for those accurate hunting/tactical loads!
- You cannot add that amount to the cart — we have 1 in stock and you already have 1 in your cart. View cart
Showing all 24 results
-
Sale!
270 WSM Brass
Original price was: $111.00.$99.90Current price is: $99.90.Add to cart270 WSM Brass Cartridge: 270WSM (Winchester Short Magnum) Primer Pocket: Large Annealed: Yes Primed: No Box Count: 50 Atlas Development Group Designed for precision shooters and reloading enthusiasts who seek the pinnacle of performance, this innovative product sets a new standard in the industry. Why the 270 WSM (Winchester Short Magnum) ADG Brass Stands Out: Precision Engineering: The ADG …
-
Sale!
7-6.5 PRCW Brass
Original price was: $99.50.$89.55Current price is: $89.55.Read more7-6.5 PRCW Brass Cartridge: 7-6.5 PRCW Primer Pocket: Large Annealed: Yes Primed: No Box Count: 50 Atlas Development Group Designed for precision shooters and reloading enthusiasts who seek the pinnacle of performance, this innovative product sets a new standard in the industry. Why the 7-6.5 PRCW Stands Out: Precision Engineering: The PRCW is crafted for unmatched accuracy, offering superior …
-
Sale!
300 SAUM Brass
Price range: $79.99 through $104.48Select options This product has multiple variants. The options may be chosen on the product page300 SAUM Brass 300 SAUM BRASS (Short Action Ultramag) – ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case …
-
Sale!
6.5 SAUM Brass
Original price was: $107.50.$96.75Current price is: $96.75.Add to cart6.5 SAUM Brass Premium Rifle Cartridge Cases – All ADG 6.5 SAUM Brass is offered in a 50 piece retail box that utilizes a custom ammo box and foam liner to protect the brass during shipment. These boxes are made in the USA and can be reused to store and transport your loaded ammo. Our …
-
Sale!
300 PRC
Original price was: $97.85.$89.99Current price is: $89.99.Add to cart50 count box
Standard Annealed Finish
ADG 300 PRC
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
7 PRC
$97.85Add to cart7 PRC Brass ADG 7 PRC Brass. ADG recommends minimum starting loads when using their product due to differences in case volume and an increase of pressures and bullet velocity. Cartridge: 7mm PRC Primer Pocket: Large Annealed: Yes Primed: No Box Count: 50 Home – Atlasdg.com J&A Outdoors – Firearm Solutions – Shooting Products (jaoutdoors.com) About ADG Brass …
-
Sale!
6.5 PRC
Original price was: $90.50.$84.00Current price is: $84.00.Add to cart50 count box
Standard Annealed Finish
6.5 PRC (Precision Rifle Cartridge)
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
Sale!
300 WSM
Original price was: $103.00.$79.99Current price is: $79.99.Add to cart300 WSM ADG 300 WSM brass was designed not only for consistency, but for durability. One of the ways we accomplished this was adding material to the case in specific areas to strengthen it. With the additional material, our brass is heavier than most other manufacturers brass and therefore will require lower charge weights to …
-
28 Nosler
$137.50Read more50 count box
Standard Annealed Finish
ADG 28 Nosler
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
375 Rem Ultra Mag
$132.50Read moreDescription
375 Rem Ultra Mag Brass – ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
Available in our standard finish with the anneal line visible
-
30 Nosler
$135.00Read more50 count box
Standard Annealed Finish
ADG 30 Nosler
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
300 Norma Mag
$127.50Read more50 count box
Standard Annealed Finish
ADG 300 Norma Magnum
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
Sale!
300 RUM
Price range: $99.99 through $126.00Select options This product has multiple variants. The options may be chosen on the product page50 count box
300 Rem Ultra Mag
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
308 winchester
$41.50Read more50 count box
Standard Annealed Finish
ADG 308 winchester
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
Sale!
338 EDGE
Price range: $99.99 through $139.13Select options This product has multiple variants. The options may be chosen on the product page338 EDGE Additional information CALIBER 338 EDGE FINISH Standard / BRIGHT QUANTITY Retail Box (50 pc) CASE WEIGHT 264.7 grains (average) CASE VOLUME 114.6 grains/H2O (average) NECK WALL THICKNESS .0146″ (average) Our brass is tracked with a custom lot number for quality control which is located on the underside of box. Premium Rifle Cartridge Cases …
-
338 Lapua
$145.00Read more50 count box
Standard Annealed Finish
ADG 338 Lapua
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
Sale!
338 RUM
Price range: $118.99 through $139.13Select options This product has multiple variants. The options may be chosen on the product page338 RUM Additional information CALIBER 338 RUM FINISH Standard/Bright & Shiny QUANTITY Retail Box (50 pc) CASE WEIGHT 258.5 grains (average) CASE VOLUME 110.5 grains/H2O (average) NECK WALL THICKNESS .0146″ (average) Our brass is tracked with a custom lot number for quality control which is located on the underside of box. Premium Rifle Cartridge Cases …
-
6.5 creedmoor
$45.50Read more50 count box
Standard Annealed Finish
ADG 6.5 creedmoor
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
Sale!
7mm Remington Magnum Brass
Price range: $83.70 through $97.65Select options This product has multiple variants. The options may be chosen on the product page7mm Remington Magnum Brass Additional information CALIBER 28, 7mm FINISH Bright, Standard QUANTITY Retail Box (50 pc) CASE WEIGHT 240.6 grains (average) CASE VOLUME 82.3 grains/H2O (average) NECK WALL THICKNESS .0132″ (average) Premium Rifle Cartridge Cases – All 7mm Remington Magnum ADG Brass is offered in a 50 piece retail box that utilizes a custom ammo box …
