Top rated products
-
T3x WSM short action
$775.00
-
Hawkins 30mm Low Scope Rings
$167.00
-
SRS 4.25 Bipod Rail
$37.99
-
6.5 Creedmoor
$70.00
-
Savage Large Shank Nut & Lug
$29.99
338 EDGE
$121.03 – $127.08
Additional information
| CALIBER | 338 EDGE |
|---|---|
| FINISH | Standard / BRIGHT |
| QUANTITY | Retail Box (50 pc) |
| CASE WEIGHT | 264.7 grains (average) |
| CASE VOLUME | 114.6 grains/H2O (average) |
| NECK WALL THICKNESS | .0146″ (average) |
Our brass is tracked with a custom lot number for quality control which is located on the underside of box. Premium Rifle Cartridge Cases –
All ADG Brass is offered in a 50 piece retail box that utilizes a custom ammo box and foam liner to protect the brass during shipment. These box are made in the USA and can be reused to store and transport your loaded ammo.
| Weight | 160 oz |
|---|---|
| Dimensions | 8 × 6 × 4 in |
| Finish | Standard, Bright / Shiny |
Related products
-
28 Nosler
$123.60Read more***slated to arrive 5/22/2022***
50 count box
Standard Annealed Finish
ADG 28 Nosler
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
375 Rem Ultra Mag
$118.45Add to cartDescription
375 Rem Ultra Mag Brass – ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
Available in our standard finish with the anneal line visible
-
300 Norma Mag
$123.60Read more50 count box
Standard Annealed Finish
ADG 300 Norma Magnum
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
-
300 Win Mag
$84.50Read morePRE – SALE!
We should see this allocation by 3/7/2022. Orders will be processed in the order they are received.
count box
Standard Annealed Finish
300 Winchester Magnum Brass –
ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
