Cart

Your Cart is Empty

Back To Shop

Tag: remington

Showing all 14 results

  • 6.5 SAUM Brass

    $107.50

    6.5 SAUM Brass Premium Rifle Cartridge Cases – All ADG 6.5 SAUM Brass is offered in a 50 piece retail box that utilizes a custom ammo box and foam liner to protect the brass during shipment.  These boxes are made in the USA and can be reused to store and transport your loaded ammo. Our …

    6.5 SAUM BrassRead More

    Add to cart
  • 300 PRC

    Original price was: $97.85.Current price is: $88.07.

    50 count box

    Standard Annealed Finish

     

    ADG 300 PRC

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Add to cart
  • BOLT KNOBS

    $25.00

    BOLT KNOBS Bolt knobs with 5/16-24 tpi threads. Several variations that are a great addition to any bolt gun to add positive grip for easier, more reliable bolt cycling. Spiral Fluted Tactical Large Profile These Knobs are made of 7075 T6 Aircraft Grade Aluminum 1.6″Long 0.990″ Major Diameter Tapered up from a 0.405″ diameter at …

    BOLT KNOBSRead More

    Select options This product has multiple variants. The options may be chosen on the product page
  • 28 Nosler

    $137.50

    50 count box

    Standard Annealed Finish

     

     

    ADG 28 Nosler

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Add to cart
  • 30 Nosler

    $135.00

    50 count box

    Standard Annealed Finish

     

     

    ADG 30 Nosler

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Read more
  • 300 Norma Mag

    $127.50

    50 count box

    Standard Annealed Finish

     

     

    ADG 300 Norma Magnum

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Read more
  • 308 winchester

    $41.50

    50 count box

    Standard Annealed Finish

     

     

    ADG 308 winchester

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Read more
  • 338 EDGE

    $132.50$139.13

    338 EDGE Additional information CALIBER 338 EDGE FINISH Standard / BRIGHT QUANTITY Retail Box (50 pc) CASE WEIGHT 264.7 grains (average) CASE VOLUME 114.6 grains/H2O (average) NECK WALL THICKNESS .0146″ (average) Our brass is tracked with a custom lot number for quality control which is located on the underside of box. Premium Rifle Cartridge Cases …

    338 EDGERead More

    Select options This product has multiple variants. The options may be chosen on the product page
  • 338 Lapua

    $145.00

    50 count box

    Standard Annealed Finish

     

     

    ADG 338 Lapua

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Read more
  • 338 RUM

    $119.25$139.13

    338 RUM Additional information CALIBER 338 RUM FINISH Standard/Bright & Shiny QUANTITY Retail Box (50 pc) CASE WEIGHT 258.5 grains (average) CASE VOLUME 110.5 grains/H2O (average) NECK WALL THICKNESS .0146″ (average) Our brass is tracked with a custom lot number for quality control which is located on the underside of box. Premium Rifle Cartridge Cases …

    338 RUMRead More

    Select options This product has multiple variants. The options may be chosen on the product page
  • 6.5 creedmoor

    $45.50

    50 count box

    Standard Annealed Finish

     

     

    ADG 6.5 creedmoor

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Read more
  • 7mm Remington Magnum

    $93.00$97.65

    50 count box

    7mm REM MAG BRASS

    ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.

     

    We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.

     

     

     

    Select options This product has multiple variants. The options may be chosen on the product page

Cart

Your Cart is Empty

Back To Shop