Top rated products
-
Triggertech Primary Trigger
$164.99
-
TriggerTech Diamond Flat Straight
$304.99
-
TriggerTech Diamond Curved
$304.99
-
BT46-LW17 PSR Atlas Bipod
$354.95
-
BT47-LW17 PSR Atlas Bipod
$374.95
Category: Tikka Accessories
Showing 33–64 of 68 results
-
Stiller/Lone Peak Long Range Hybrid Rings
$149.00Select options This product has multiple variants. The options may be chosen on the product pageStiller/Lone Peak Long Range Hybrid Rings Stiller/Lone Peak Long Range Hybrid Rings. Ultra-light sleek design. 25 MOA built in can’t. Bubble level included. Available in 30mm low sizes. These rings fit the following actions: Stiller Lone Peak Pierce Kelbly atlas lite There is nothing on the market today that compares with the Hawkins Precision …
-
Sale!
Hawkins 30mm Ultra Light Tactical Scope Rings
$166.50 – $185.00Select options This product has multiple variants. The options may be chosen on the product pageHawkins 30mm Ultra Light Tactical Scope Rings Ultra-Light Tactical Scope Rings Hawkins 30mm Ultra Light Tactical Scope Rings are made in the USA out of billet 6061 T6 aluminum. These fully machined rings are robust and feature a corrosion-resistant black anodized finish. Machined with a clamp and recoil lug made from 7075 aluminum, these scope …
-
Sale!
Hawkins 34mm Ultra Light Tactical Scope Rings
$166.50 – $185.00Select options This product has multiple variants. The options may be chosen on the product pageHawkins 34mm Ultra Light Tactical Scope Rings Ultra-Light Tactical Scope Rings Ultra-light tactical scope rings from Hawkins Precision are made in the USA out of billet 6061 T6 aluminum. These fully machined rings are robust and feature a corrosion-resistant black anodized finish. Machined with a clamp and recoil lug made from 7075 aluminum, these scope …
-
Sale!
4.4” Bipod Picatinny Mount
$6.99 – $42.00Select options This product has multiple variants. The options may be chosen on the product pageMADE IN THE USA!
- 4.4” Bipod Picatinny Mount.
- Constructed from Billet Aluminum.
- 1 ounce weight
- QD Cup machined into the rail for optimal sling use.
- This 4.4” picatinny bipod Rail will accommodate hole patterns with a center to center spacing of 2.2” – 3.5″ with a Semi Rounded Bottom to accommodate many chassis/surfaces.
-
Sale!
4.5” Bipod Picatinny Mount
$6.99 – $42.00Select options This product has multiple variants. The options may be chosen on the product pageMADE IN THE USA!
- 4.5” Bipod Picatinny Mount.
- Constructed from Billet Aluminum.
- 1 ounce weight
- QD Cup machined into the mount along with sling swivel stud.
- This 4.5” picatinny bipod Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5″ with a Semi Rounded Bottom to accommodate many chassis/surfaces.
-
Sale!
Arca Pic Picatinny QD Mount
$59.99 – $69.99Select options This product has multiple variants. The options may be chosen on the product pageMade in the USA by hard working Americans!
- Arca – picatinny mount, 1 rail with dual use!
- Rounded bottom design (fits flush with rifle stock).
- 4.50 inch Overall Length.
- Bolt/mount spacing: 2.5” to 3.35”.
- Weight is 1.6 oz!
- Integrated Sling stud with two QD sling ports.
- 1.5 inches of arca rail and 1.0 inches of picatinny rail.
- 10-32 fasteners included with Tee nuts.
-
Sale!
Mini Arca Rail Mount
$6.99 – $34.99Select options This product has multiple variants. The options may be chosen on the product pageMade in the USA by hard working Americans!
- 1.50” arca rail Rifle Mount.
- Billet aluminum construction.
- Black, FDE, OD Green, bronze or tungsten cerakote available!
- Semi Rounded bottom to accommodate many stock designs
- Weight: .50 ounces.
- Compatible with Arca Swiss style tripod heads.
- Overall length: 1.50” OAL
- Bolt/Mount spacing .850 inches.
- 10-32 fasteners with tee nuts included for installation.
-
Sale!
3” Arca Rail Mount
$41.99 – $48.99Select options This product has multiple variants. The options may be chosen on the product pageMade in the USA by hard working Americans!
- 3” arca rail Rifle Mount.
- Billet aluminum construction.
- Anodized black.
- Flat bottom with a small radius in the center to accommodate a multitude of stock designs.
- Weight: .80 ounces.
- Compatible with Arca Swiss style tripod heads.
- Overall length: 3.0” OAL
- Bolt/Mount spacing up to .70 to 2.250 inches.
- 10-32 fasteners with tee nuts included for installation.
-
Sale!
4” Arca Balance Rail Mount
$44.99 – $49.99Select options This product has multiple variants. The options may be chosen on the product pageMade in the USA by hard working Americans!
- 4” arca balance rail mount.
- Semi rounded bottom center cut to allow for mounting on multiple stocks/chassis.
- Available in Black, Bronze, FDE, OD Green & Tungsten Finishes.
- Perfect balance point for mounting just forward of front action screw.
- Billet aluminum construction.
- Weight: 1.10 ounces.
- Compatible with Arca Swiss style tripod heads.
- Overall length: 4.0” OAL
- 10-32 fasteners with tee nuts included for installation.
-
Sale!
Arca Picatinny Hybrid Long Rail Mount
Original price was: $119.99.$107.99Current price is: $107.99.Select options This product has multiple variants. The options may be chosen on the product pageMade in the USA by hard working Americans!
- Semi Rounded bottom to fit many different variations of stocks.
- Integrated Sling Stud & QD Cup.
- Each Arca picatinny hybrid rail comes with 4 sets of 10-32 screws and Tee nuts.
- 4.0 Ounces overall weight
-
Arca Picatinny Hybrid Short Rail Mount
$75.00Add to cart- 7 Inches Overall Length
- 2.2 Ounces
- Semi Rounded bottom to fit many different variations of stocks.
- 4 Picatinny Slots
- 3.25 Inches of Arca
- 2 QD Sling Ports
- 1 Sling swivel Stud
- Aggressive lightweight Pockets and crucial gussets to make this a rock-solid reliable rail.
- 4 Screws with tee nuts included
-
Sale!
Tikka T3 / T3X Trigger Guard
Original price was: $45.00.$19.99Current price is: $19.99.Add to cartThese are brand new factory take off trigger guards. PLEASE NOTE, there is a small polymer guide pin on the rear of the trigger guard (this helps alignment with the new style t3x stocks) The wood stocks along with the older generation t3 stocks do not have this pin (it must be removed before install.)
-
Tikka T3/T3x Trigger Guard
$150.00Add to cartTikka T3/T3x Trigger Guard
Aluminum trigger guard for the Tikka T3/T3x. This is a direct replacement for the factory Tikka plastic trigger guard. It is a drop in fit with a rounded profile minimize snagging/sharp edges. Factory Tikka magazines work flawlessly with this bottom metal.
-
Tikka bottom metal trigger guard
$150.00Read moreTikka bottom metal trigger guard Our Gen2 Tikka bottom metal trigger guard includes updates based on customer feedback. The trigger guard has been rounded to eliminate hard corners that could cause discomfort while shooting. Pulling design cues from classic American bolt action rifles, the Mountain Tactical Company Tikka Bottom Metal is a great addition to …
-
Sale!
Tikka T3X Vertical Pistol Grip
$25.00 – $39.99Select options This product has multiple variants. The options may be chosen on the product pageProduct Description
•••••Description: Tikka T3X Vertical Pistol Grip, Black. This is a factory original Tikka T3X part. Made for Tikka T3X rifles, this OEM part is the perfect replacement for your worn or missing part. This interchangeable vertical pistol grip is only compatible with T3X synthetic stocks.
Manufacturer: Tikka
-
Tikka Threaded Bolt Handle
$64.99Add to cartTikka threaded bolt handle.
- Titanium construction
- Fits RIGHT hand actions ONLY.
- 20-degree sweep.
- .450 diameter where the shoulder starts to mate to bolt handle.
- Threaded 5/16-24
- Fits ALL Tikka T3, T3X, CTR and TAC A1.
- Due to variance in manufacturing between the t3 & t3x line there may be minor fitting needed for this bolt stem.
*This bolt handle is not compatible with the Tikka T1X and the Tikka 695.
-
Sale!
Tikka Magazine Retention Spring
Original price was: $24.99.$23.99Current price is: $23.99.Add to cartTikka T3/T3x Magazine Retention Spring
The T3x Magazine retention spring mounts on the front of the trigger assembly in order to apply forward pressure on the Magazine. This spring aids in the function of both the Magazine and the Magazine release.
-
Sale!
Tikka Picatinny Rail Mount
$62.99 – $69.99Select options This product has multiple variants. The options may be chosen on the product pageTikka Picatinny Rail Mount Tikka Picatinny Rail Mounts available in many variations. J&A 20 MOA rail, 6061 Aluminum. Built in recoil lug – anodized black. Mountain tactical tikka receiver length 20 MOA Rail: The primary advantage of the Performance Series Picatinny rail system is our proprietary utilization of Tikka’s Opti-Lock recess in the action. This …
-
Tikka Steel Recoil Lug
$22.00 – $30.00Select options This product has multiple variants. The options may be chosen on the product pageTikka Steel Recoil Lug Description MOUNTAIN TACTICAL® is proud to announce our Gen 4 Recoil lugs for your Tikka T3 and Tikka T3x rifle. Our latest generation of recoil lugs are a significant upgrade from the third generation of lugs. We have upgraded the material used to manufacture these precision components. It is a specialized …
-
Sale!
Tikka / Sako Extractor Kit
Original price was: $55.00.$48.99Current price is: $48.99.Add to cartTikka T3, and T3X Bolt Spare Parts Kit. These are factory original take off Tikka T3x parts. This kit is made in Finland for the Tikka Model T3 & T3x rifles. This pack includes:
- Extractor
- Extractor Plunger
- Extractor Spring
-
Sale!
Tikka T3 / T3X Bolt Handle
$25.00 – $60.00Select options This product has multiple variants. The options may be chosen on the product pageTikka T3 / T3X Bolt Handle Product Description ••••• Description: Tikka T3 / T3X Bolt Handle, RH. These are factory original Tikka parts made in Finland. Made to the highest standards, they are the perfect replacement for worn or missing parts. RIGHT & LEFT HAND Manufacturer: Tikka Note: It is recommended that all Tikka parts be installed by …
-
Sale!
Tikka Ejector Kit
$9.99 – $33.99Select options This product has multiple variants. The options may be chosen on the product pageTikka Ejector Kit Description: Tikka T3, and T3X Bolt Spare Parts Kit. These are factory original take off Tikka T3x parts. This kit is made in Finland for the Tikka Model T3 & T3x rifles. This pack includes: Ejector Ejector Spring Spring Pin Manufacturer: Tikka J&A Outdoors – Firearm Solutions – Shooting Products (jaoutdoors.com) Choose | …
-
Sale!
Tikka T3 / T3X Firing Pin Assembly
Original price was: $199.99.$179.99Current price is: $179.99.Add to cartTikka T3 / T3X Firing Pin Assembly Description: Tikka T3 / T3X Firing Pin Assembly. This complete firing pin assembly is made from polished steel and includes the firing pin, firing pin spring and firing pin spring guide. The assembly will fit Tikka T3 and T3X model rifles chambered in calibers such as .22-250 Rem, .308 …
