Category
- ACE Barrels
- ADG BRASS
- AG Composites
- Arca – Picatinny Rails
- Atlas bipods & accessories
- Bargain Cave
- Benchmark Barrels
- Berger Bullets
- Cerakote Services
- Christensen Arms Actions & Accessories
- Custom Barrel Blanks
- Custom Rifles
- Dead Air Silencers
- Defiance Actions
- Gun Screws
- Gunsmith Services
- H-S Precision
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Kinport Peak Rifles Barrel Services
- KRG
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Meraki Machine
- Mesa Precision Arms
- Mountain Tactical
- Muzzle Brakes
- Nightforce Optics
- Norma Brass
- Optics
- Proof Research
- Pure Precision
- Redding Reloading
- Remington Actions & Accessories
- Ruger
- Savage actions & accessories
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- TriggerTech Triggers
- Vortex Optics
- Western Precision Rifles
- XLR Industries
Products
- ACE Barrels
- ADG BRASS
- AG Composites
- Arca - Picatinny Rails
- Atlas bipods & accessories
- Bargain Cave
- Benchmark Barrels
- Berger Bullets
- Cerakote Services
- Christensen Arms Actions & Accessories
- Custom Barrel Blanks
- Custom Rifles
- Dead Air Silencers
- Defiance Actions
- Gun Screws
- Gunsmith Services
- H-S Precision
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Kinport Peak Rifles Barrel Services
- KRG
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Meraki Machine
- Mesa Precision Arms
- Mountain Tactical
- Muzzle Brakes
- Nightforce Optics
- Norma Brass
- Optics
- Proof Research
- Pure Precision
- Redding Reloading
- Remington Actions & Accessories
- Ruger
- Savage actions & accessories
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- TriggerTech Triggers
- Vortex Optics
- Western Precision Rifles
- XLR Industries
Top rated products
- Triggertech Primary Trigger $164.99
- TriggerTech Diamond Flat Straight $304.99
- TriggerTech Diamond Curved $304.99
- BT46-LW17 PSR Atlas Bipod $354.95
- BT47-LW17 PSR Atlas Bipod $374.95
T3X S.S. WSM action
$825.00
Tikka T3x WSM action
- .540 bolt face (works for calibers like WSM’s, SAUM’S – 6.5 PRC, etc)
- Stainless steel
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note –
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued & UNCOATED stainless steel actions – these will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
Only 1 left in stock (can be backordered)
T3X S.S. WSM action
- .540 bolt face (works for calibers like WSM’s, SAUM’S – 6.5 PRC, etc)
- Stainless steel
- 20 MOA Picatinny rail with integrated opti-lock recoil lug.
- Billet aluminum knurled handle
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM polymer trigger guard
- OEM trigger
- weight as pictured – 2 lbs. 5 ounces
Important to note –
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued & UNCOATED stainless steel actions – these will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
***MUST SHIP TO FFL***
- J&A Outdoors LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without a valid FFL.
- It is the buyer’s responsibility to check and comply with local, state, and federal laws. The buyer assumes all legality, liability and responsibility for the condition, use & security/storage of the firearm/receiver purchased.
- It is the buyer’s responsibility to contact the FFL dealer. Be aware that it is customary for your local dealer to charge a transaction fee at the time you pick up your purchase. This transfer fee is strictly between you and your local dealer. It is your responsibility to check with your local dealer concerning any policy of this kind and concerning your obligations.
- You the buyer are responsible for forwarding a copy of the FFL and all pertinent contact information to J&A outdoors LLC. FFL’s can be sent to:
Weight | 48 oz |
---|---|
Dimensions | 7 × 5 × 4 in |
Related products
-
Tikka Factory Magazines
$39.99 – $50.99Select options This product has multiple variants. The options may be chosen on the product pageTikka Factory Magazines The tikka factory magazines are made of highly rigid and durable glass fiber-reinforced plastic composite that is not affected by temperature changes. The magazine’s structure will remain unchanged even when dropped accidentally, unlike magazines with metal structures, enabling reliable cartridge feeding. The magazine is designed to support the cartridges from the body, …
-
T3x Magnum Long Action
$855.00Add to cart7-10 Business day lead time if purchasing actions on backorder.
Tikka T3x lite magnum long action
- .540 magnum bolt face (works for calibers like 264 win mag, 7 rem mag, 300 win mag, 338 win mag, etc.)
- Chromoly blued steel
- Factory fluted bolt
- Factory oversized bolt knob
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM polymer trigger guard
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
Tikka S.S. CTR short action
$970.00Add to cartTikka S.S. CTR short action 308 bolt face (22-250,243,6.5 creedmoor, etc) Stainless Steel Picatinny Rail Stainless steel Factory oversized bolt knob short action bolt stop OEM detachable 10 round steel magazine (internal magazine length of 2.965) OEM ALUMINUM bottom metal OEM trigger weight as pictured – 2 lbs. 14 ounces ALL factory with NO modifications …
Email Newsletter
Best offers
100% Safe
Secure Shopping
Quick Customer Support
Tuesday-Friday