Category
- ADG BRASS Reloading components
- AG Composites
- Atlas bipods & accessories
- Berger Bullets
- Christensen Arms Actions & Accessories
- Custom barrel Blanks
- Custom Rifles
- Defiance Actions
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Mesa Precision Arms
- Muzzle Brakes
- Norma Brass
- Proof Research
- Redding dies
- Remington Actions & Accessories
- Savage actions & accessories
- SRS Rails
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- TriggerTech Triggers
- Vortex Optics
- XLR Industries
Products
- ADG BRASS Reloading components
- AG Composites
- Atlas bipods & accessories
- Berger Bullets
- Christensen Arms Actions & Accessories
- Custom barrel Blanks
- Custom Rifles
- Defiance Actions
- Hawkins Precision
- Hells Canyon Armory
- Hornady
- Kelbly Actions
- Lapua
- Leupold Optics
- Manners Stocks
- McMillan Stocks
- MDT Chassis
- Mesa Precision Arms
- Muzzle Brakes
- Norma Brass
- Proof Research
- Redding dies
- Remington Actions & Accessories
- Savage actions & accessories
- SRS Rails
- Thunder Beast Suppressors
- Tikka Actions & Accessories
- TriggerTech Triggers
- Vortex Optics
- XLR Industries
Top rated products
-
T3x WSM short action $775.00
-
Hawkins 30mm Low Scope Rings
$185.00$167.00 -
Trigger Pins
$11.99$7.95 -
300 PRC
$120.00$99.99 -
Savage Pre-fit Carbon Barrels $689.99 – $879.00
Tikka Tactical Action
$765.00
Tikka T3x Tactical
Stainless Steel
DLC coated Bolt
Tactical Handle
OEM Pinned 0 MOA picatinny rail
***MUST SHIP TO FFL***
- J&A Outdoors LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without a valid FFL.
- It is the buyer’s responsibility to check and comply with local, state, and federal laws. The buyer assumes all legality, liability and responsibility for the condition, use & security/storage of the firearm/receiver purchased.
- It is the buyer’s responsibility to contact the FFL dealer. Be aware that it is customary for your local dealer to charge a transaction fee at the time you pick up your purchase. This transfer fee is strictly between you and your local dealer. It is your responsibility to check with your local dealer concerning any policy of this kind and concerning your obligations.
- You the buyer are responsible for forwarding a copy of the FFL and all pertinent contact information to J&A outdoors LLC. FFL’s can be sent to:
support@JAOUTDOORS.com
Category: Tikka Actions & AccessoriesTags: action, Backcountry, bare, bolt, bolt knob, Bottom metal, CTR, custom bolt, fluted, Magazine, magnum, prefit, receiver, Rem mag., rifle, RUM, Sako, SAUM, sheep rifle, standard, T3, T3X, Tac A1, tikka, trigger guard. stripped, Ultralight, Win mag, WSM, WSSM. Trigger
Configuration | Long Action SS, Short Action SS |
---|
SKU: N/A
Category: Tikka Actions & Accessories
Related products
-
T3x LONG action 30-06
$625.00Read moreTikka T3x lite LONG action
- .473 bolt face (works for calibers like 25-06,270win,280rem,30-06)
- Chromoly blued steel
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued and UNCOATED stainless steel actions, these will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3X S.S. MAGNUM Long Action
$675.00Read moreTikka T3x lite long action magnum bolt face
- .540 magnum bolt face (works for calibers like 264 win mag, 270 weatherby, 300 weatherby, 340 weatherby, 300 PRC, 300 win mag, 7 mag, RUM family)
- Stainless steel
- LONG action bolt stop
- 3 round detachable magazine (internal magazine length of 3.370)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 2 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued & Uncoated Stainless-steel actions – these will come with no imperfections on the finish. Also, In some cases there will be tooling marks on the inside of the receiver face/threads where tikka/Sako reams the bolt raceways with their tooling. This is cosmetic only – it does not affect function whatsoever.
-
CTR short action 308
$850.00$839.99Add to cartTikka CTR short action
- 308 bolt face (22-250,243,6.5 creedmoor, etc)
- Chromoly blued steel
- Factory BLACK
- Factory oversized bolt knob
- short action bolt stop
- detachable 10 round steel magazine (internal magazine length of 2.965)
- OEM ALUMINUM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 14 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.
-
T3x S.S. WSM short action
$820.00Read moreTikka T3x lite WSM short action
- .540 magnum bolt face (works for calibers like 270 wsm, 7 wsm, 300 wsm, 6.5 saum, 7 saum, 300 saum, 6.5 PRC)
- Stainless steel
- Factory Cerakote VEIL alpine
- Factory fluted bolt
- Factory oversized bolt knob
- short action bolt stop
- 3 round detachable magazine (internal magazine length of 2.830)
- OEM bottom metal
- OEM trigger
- weight as pictured – 2 lbs. 1 ounces
- ALL factory with NO modifications
Important to note–
In some rare cases there may be small imperfections in the finish on the veil cerakote models (we will note this in the ad if there are any blemishes). As for the chromoly blued steel actions they will come with no imperfections on the finish. Also In some cases there will be tooling marks on the inside where tikka/sako reams the bolt raceways with their tooling. This does not effect function whatsoever.